This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
Differential Pressure Cone Meter is a fluid flow meter that uses a measured differential pressure to provide a robust, accurate, repeatable and optimal cost measurement solution for both gas and liquid measurement.
The SmartCone® meter produces a differential pressure which
can be read by any standard differential pressure or multivariable transmitter.
The meter is the first differential pressure cone meter to use artifact calibration techniques similar to orifice plate technology, which is inherent in the design. Each SmartCone®
meter has a verifiable
geometry between subsequent manufactured devices using accurate and robust machined castings. It features the unique ability to offer a beta or area ratio change per diameter using interchangeable ARC’s. This allows the metered products’ flow velocity characteristics to be aligned correctly throughout the life of the meter.
FEATURES • Maximum differential pressure: Up to 400 inches of water column(100 kPa) • Metering Accuracy of up to ±0.5%
G
• Repeatability: ±0.1% of Full Scale or Better Without Stacked DP • Sturdy Stainless Steel Construction • Built-in Temperature (RTD) Port • Optional Downstream Pressure Tap • Wafer or Flange Design • Standard NPT Ports • Standard Built-in RTD Port • Available up to 1500 ANSI
• Self-aligning, self-centering, interchangeable ARC (Area/Beta Ration Changer) machined from 316SS • 10:1 turndown with each ARC • 3 Available ARCs per meter line size
APPLICATIONS
• Liquid & Gas Measurement • Well Head Measurement • Custody Transfer • Fuel Metering • Wet Gas