This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
Hex Body with Cable Hex Body with Cable Hex Body with Cable Hex Body with Cable
Round Body with Connector Round Body with Connector Round Body with Connector Round Body with Connector Round Body with Connector Round Body with Connector Round Body with Connector Round Body with Connector Round Body with Connector Round Body with Connector Fully Threaded with Cable Fully Threaded with Cable Fully Threaded with Cable Fully Threaded with Cable
Thread Size
⅝ ⅝ ⅝ ⅝ ¾ ¾ ¾ ¾ ⅝ ⅝ ⅝ ⅝ ⅝ ⅝ ⅝ ⅝ ⅝ ⅝
Fully Threaded with Cable and Temperature Output ⅝ Fully Threaded with Cable and Temperature Output ⅝
*NOTE: RTD Temperature Sensing Feature ¹ B designates Group B in Connector/Cable Assembly table. Please contact Rawson for more details.
Active Speed Sensors
BH Series DESCRIPTION
The BH Series of sensors are bi-directional, zero velocity sensors which are self-calibrating to the specific customer application and provide two independent frequency outputs and a direction signal output to indicate change in direction of the sensed, ferrous target. The Bi-directional sensor can also be referred to as a dual channel sensor since it utilizes two Hall Effect sensing elements, physically offset from each other.
FEATURES • 2 output channels + direction • Zero speed to 15kHz operation • Standard gear tooth sensing • Fine, 32 DP capability • Single tooth/valley target • No installation alignment • Extended airgap (0.100" + for 12DP and coarser targets) • General noise immunity • EMI hardened • High tolerance to target run-out • Self-calibrating • Direction sensing
-40 to 257 -40 to 257 -40 to 257 -40 to 257 -40 to 257 -40 to 257 -40 to 257 -40 to 257 -40 to 257 -40 to 257 -40 to 257 -40 to 257 -40 to 257 -40 to 257 -40 to 257 -40 to 257 -40 to 257 -40 to 257 -40 to 257