This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
Bulk Instrumentation and Accessories • Installation Support
Tubing Clamps Single Line Tubing Clamps
Duplex Line Tubing Clamps
C
DESCRIPTION Channel-Track Single Line Tubing Clamps are precision manufactured from 316SS. All edges have been mechanically deburred to protect tubing from any damage. These industry proven clamps provide a high strength, corrosion resistant means by which to secure single runs of instrument tubing in an orderly fashion. Packaged in quantities of 50 per bag. Available upon request with #10 hole size.
DESCRIPTION Channel-Track Duplex Tubing Clamps are constructed of high strength, temperature and corrosion resistant 316SS. These precision manufactured clamps of fer an easy, positive clamping action that secures two evenly spaced instrument tubing lines simultaneously. All sharp edges have been mechanically deburred to eliminate any possible damage to coated tubing. Packaged in quantities of 50 per bag. Available upon request with #10 hole size.
Item
¼" ⅜" ½
Tube Size (o.d.)
Tubing Gang Clamps with Backplates
Table 1 XXX
Table 1 GCL
Table 2 X
HOW TO ORDER Table 3 XX
Gang Clamps
DESCRIPTION Channel-Track Tubing Gang Clamps with Backplates are precision engineered devices that gather together from two (2) to twenty (20) tubes. With their construction of 316SS, these clamps of fer a versatile and efficient, high strength, corrosion resistant method of organizing multiple runs of tubing. They are mechanically deburred to eliminate any sharp edges which could be damaging to coated tubing. Packaged in quantities of 25 per bag. Available upon request with #10 hole size.
Table 2 Tube Diameter 25 37 50
Table 3 SS
1/4" O.D. 3/8" O.D. 1/2" O.D. Material 316SS
Table 4 Tube Capacity XX
Table 5 BP
Back Plates RAWSON - An ERIKS Company • www.rawsonlp.com • 800-688-8126 319
Specify number of tubes (2 to 20), the gang clamps back plates will gather