news digest ♦ Power Electronics requirements of next-generation power semiconductor devices.
The Model 2657A is optimised for high voltage applications such as testing power semiconductor devices, including diodes, FETs, and IGBTs, GaN, SiC, and other compound semiconductor materials. It can also be used to characterise high speed transients and performing breakdown and leakage tests on a variety of electronic devices at up to 3,000 V.
Like the rest of the Series 2600A family, the Model 2657A offers a four-quadrant voltage and current source/load coupled with precision voltage and current meters. It combines the functionality of multiple instruments in a single full-rack enclosure: semiconductor characterisation instrument, precision power supply, true current source, 6 ½ -digit DMM, arbitrary waveform generator, voltage or current pulse generator, electronic load, and trigger controller, and is fully expandable into a multi-channel, tightly synchronised system via Keithley’s TSP-Link technology.
Keithley says that unlike competitive solutions, which are typically limited in terms of power, the Model 2657A can source or sink up to 180 W of DC power (± 3,000 V @20 mA, ± 1500 V @ 120 mA).
The Model 2657A also offers 1 fA resolution, allowing it to make fast, accurate sub- picoamp measurements even when sourcing up to 3000 V.
The Model 2657A provides a choice of digitising or integrating measurement modes for characterising both transient and steady-state behaviour, including rapidly changing thermal effects. Each mode is defined by two independent analogue- to-digital (A/D) converters ; one for current and the other for voltage. Both run simultaneously to ensure accurate source readback without sacrificing test throughput.
The digitising measurement mode’s 18-bit A/D converters support one-microsecond-per-point sampling, so users can capture voltage and current transients simultaneously. In contrast, competing solutions typically must average multiple readings to produce a result, so they aren’t fast enough to characterise transient behaviour.
The integrating measurement mode, based on 22-bit A/D converters and common to all Series 2600A instruments, optimises the Model 2657A’s operation for applications that demand the highest measurement accuracy and resolution. This ensures extremely precise measurements of the very low currents and high voltages common in next-generation power semiconductor devices.
Basic device characterisation can be performed with no need for software installation or programming with TSP Express, Keithley’s LXI-based I-V test software utility. Users can simply connect a PC to the LXI LAN port and access TSP Express with any Java-enabled web browser. Test results can be viewed in either graphical or tabular format and then exported to a .csv file for use with spreadsheet applications.
Two additional tools for creating test sequences are provided with the Model 2657A: the Test Script Builder application (for creating, modifying, debugging, running, and managing TSP scripts) and an IVI-based LabVIEW driver (to simplify integrating the Model 2657A into LabVIEW test sequences).
160
www.compoundsemiconductor.net April/May 2012
The Test Script Builder application has new debugging capabilities that make test program development easier and more productive.
ACS Basic Edition software is also available as an option for component characterisation. The latest release offers a rich set of features for characterising high voltage and high current components. The included measurement libraries have been updated to support both DC and pulse mode operation of both the high voltage Model 2657A and high current Model 2651A High Power System SourceMeter instruments.
These libraries address a variety of power devices, including FETs, BJTs, diodes, IGBTs, etc., with tests that include input, output, and transfer characteristics on most devices. A special “Trace Mode” provides real-time control over an instrument’s voltage or current output using a simple slider.
The Model 2657A can be connected to other instruments in a test system with standard safe high voltage (SHV) coaxial cable connections compatible with existing high voltage test applications. However, for applications that depend on getting the most from the instrument’s low current measurement performance, Keithley also offers special HV triaxial (guarded) connections to optimise the Model 2657A’s measurement accuracy.
The optional new Model 8010 High Power Device Test Fixture provides connections for testing packaged high power devices at up to 3000 V or 100 A, making it safer and simpler to configure a device test system that includes the high voltage Model 2657A, one or two high current Model 2651A instruments, and up to three low power SMU instruments (other Series 2600A instruments or the Model 4200-SCS semiconductor characterisation system).
As well as having standard banana jumpers, the Model 8010 has rear-panel oscilloscope and thermal probe ports to simplify system integration for further DUT characterisation. The system also has full safety interlock capability.
To prevent instrument damage if a device fault occurs, integrated protection circuits in the Model 8010 safeguard the inputs of the lower voltage Series 2600A instruments from the high voltages the Model 2657A can output. Individual protection modules are also available to simplify connecting multiple SMUs safely to a third-party probe station, component handler, or other test fixture.
Price for the model 2657A starts at $17,900 depending on configuration and geography. Shipments will begin in May, with lead times of two weeks ARO.
ACS Basic Edition software is $5,000 Model 8010 High Power Test Device Fixture is $6,500.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136 |
Page 137 |
Page 138 |
Page 139 |
Page 140 |
Page 141 |
Page 142 |
Page 143 |
Page 144 |
Page 145 |
Page 146 |
Page 147 |
Page 148 |
Page 149 |
Page 150 |
Page 151 |
Page 152 |
Page 153 |
Page 154 |
Page 155 |
Page 156 |
Page 157 |
Page 158 |
Page 159 |
Page 160 |
Page 161 |
Page 162 |
Page 163 |
Page 164 |
Page 165 |
Page 166 |
Page 167 |
Page 168 |
Page 169 |
Page 170 |
Page 171 |
Page 172 |
Page 173 |
Page 174 |
Page 175