Laboratory Products 49 multi N/C® : As Easy As It Gets! Easy use and safe, trouble-free and unattended sample analysis – these
are more than ever requirements for a TOC-/TNb analyser. Operation of the instrument even without special knowledge or experiences is no problem with a multi N/C®
!
Simply unpack, connect and start measuring. Each model of the device series is pre-calibrated at the factory, thus immediately ready for use.
Correct measurement and accurate results depend on the calibration: Easy Cal makes it easier than ever before! Several calibration curves can be linked to a single measurement method: Easy Cal automatically and reliably selects the optimal calibration curve for your sample measurements.
The fully integrated Self Check System is an intelligent combination of hardware components and software functions, which automatically ensures the trouble-free operation of the entire analytical system. The result: convincing performance and perfect measurement results.
MORE INFO. 141 multi N/C® : Reliable
TOC/TNb Determination In Highly Saline Water
June 4, 2013 - June 7, 2013 In Paris/France Booth no. A80-B8
In many areas of application – extending far beyond drinking and waste water analysis – a fast and
reliable TOC/TNb determination is required. Especially samples with an extreme matrix (such as sea water, brines, concentrated acids and lyes) impose high requirements on the TOC analysers operating in accordance with the principle of catalytic high temperature incineration.
However, it is possible to significantly increase the maintenance cycles resulting from the matrix of these samples on the TOC analyser by using optimised combustion control as well as combustion tube filling with consistently stable analysis results.
Thanks to the freely selectable combustion temperature in wide ranges as well as the robust and simultaneously sensitive dimensioning of the Focus Radiation NDIR detector of the multi N/C®
series,
application solutions with minimised device wear and a significantly increased lifetime are now available.
The devices of the multi N/C® series from Analytik
Jena AG can help you to increase the productivity in your laboratory significantly and reduce the operating costs accordingly.
MORE INFO. 143 multi N/C® : Eliminating
Running Costs The price conscious user mainly looks out for
overheads when considering TOC analysis. Low- maintenance technologies for sample digestion, an environment-friendly low consumption of operating materials such as gas and power, as well as robust device engineering with a long service life help to keep the costs low. All this is offered by the TOC analysers of the multi N/C®
series! And there is more... The multi N/C® devices are equipped with state-of-
the-art digestion technology, which is characterised by an extremely low consumption of catalyst material and exceptionally long lifetimes of the combustion tube – especially for extreme matrices. The corrosion- proof Focus Radiation NDIR detector ensures reliable results and high stability – across the whole lifetime of a device. Additionally a long-lasting calibration – enabled by the patented VITA®
method – and the
daily effort for maintenance and care of the device is reduced to a minimum. This is how the TOC analyser can eliminate overheads in your lab.
Low running costs – full performance! High quality TOC analysis has never been as affordable!
MORE INFO. 144 MORE INFO. 145
multi N/C® multi N/C®
: The High-Speed TOC
was developed for an extremely high sample throughput. A wide range of autosamplers is available for the automation of the analyser. High-throughput labs are using samplers with a capacity of up to 116 samples; users with small amounts of samples are using the small, inexpensive autosamplers.
The integrated sample homogenisation (stirring), the automatic acidification and purge out features turn your autosampler into an all-rounder for sample preparation and feeding. While one sample is analysed, the next one is already under preparation. Thus, it can analyse twice as many samples. Not only the TOC determination is
fast: From a single injection you get both TOC and TNb results without any conversion of the instrument, exchange of method or catalyst. It’s time for an ‘economic boom’ in your lab! multi N/C®
guarantees
speed, high sample throughput, low downtime and extremely low running costs.
MORE INFO. 142
INTERNATIONAL LABMATE - APRIL 2013 - ADVERTORIAL
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68
