March, 2012
www.us-tech.com
Goepel: Mass Interconnect JTAG Interface
Jena, Germany — Goepel electronic has introduced PXI 1149/DAK, a mass interconnect interface within the framework of the company’s SCANFLEX® JTAG/Boundary Scan hardware platform. The new option for the SFX/PXI1149/Cx controller is compatible with SCOUT, the mass
1149/DAK2 has a differential test bus with 200 pin receiver and single-ended PIP resources. The second option, the PXI 1149/DAK1 has a single-ended test bus with 96-pin receiver as well as single-ended PIP resources and is an option for the SFX/PXI1149/Cx and SFX/PXI e1149/Cx controller. Both mass interconnect interfaces are also available in a version that supports Direct Access Kit-Extended version, PXI 1149/DAK-E1 and PXI 1149/ DAK-E2. The new PXI 1149/DAK is fully
Mass interconnect interface.
interconnect system from MAC Panel. Using this option, the customer can now easily combine JTAG/Boundary Scan with the PXI connectivity solu- tion from MAC Panel. The new module is available in
two versions. First, as an option for the SFX/PXI1149/Cx-FXT and SFX/ - PXIe1149/Cx-FXT controller, the PXI
supported by the JTAG/Boun dary Scan software platform SYSTEM CASCON™ — the company’s profes- sional JTAG/Boundary Scan develop- ment environment which currently provides 45 completely integrated
ISP, test, and debug tools. Contact: Goepel electronics LLC, 9737 Great Hills Trail, Suite 170,
Austin, TX 78759 % 888-446-3735 or 512-782-2500 E-mail:
info-AT-goepelusa.com Web:
www.goepelusa.com or
www.goepel.com
See at IPC/APEX Booth #2450.
Stress-Free Depanelizing from Fancort Industries
West Caldwell, NJ — Fancort is introducing a new depaneling ma - chine designed to separate metalized circuit boards from pre-scored panels without stress and excessive wear to the knives. The new machine is a pneumatically operated shear with two wedge shaped knives that shear panels with a gentle rocking motion as the knives penetrate the score
less than 100 microstrains, an extremely low level. The design of the new depaneler
allows for stress-free board separa- tion with components as close as 0.5mm from the score line, including delicate ceramic capacitors. It can separate boards up to 3.5mm in thickness and 300mm in length and is safe when used on thin boards, such as 0.032-in. (0.8mm) thick. The design of the machine’s
Precision PCB singulator.
line. This is in sharp contrast to con- ventional punch-and-die systems which use a guillotine motion, or machines that use round knives which can produce stress from the rolling motion of the board edges during separation. The VPD5 has been tested by an
independent lab for stress during separation and produces on average
knives separates boards with tall com- ponents near the score line, up to 1.00- in. from the top of the PCB. It is also operator goof-proof; the operator can only insert the panel into the machine along the score line, making it impos- sible to damage the boards. The VPD- 5A is easy to use, requires almost no maintenance, and can be used imme- diately when taken out of the crate with the addition of an air line and
electric to operate the foot switch. Contact: Fancort Industries,
Inc., 31 Fairfield Place, West Caldwell, NJ 07006 % 888-326-2678 or 973-575-0610 fax: 973-575-9234 Web:
www.fancort.com
See at IPC/APEX Booth #1146.
Chemcut Equipment Goes to Standard Printed Circuits
Sherburne, NY — Standard Printed Circuits, Inc., a New York based printed circuit board manufacturer, has installed a new Chemcut CC8000 alkaline etching system in its pro- duction facility. Chemcut Corpor - ation, founded in 1956, was the orig- inal developer of spray etching, a technique that made the chemical etching process practical for volume, as well as prototype production. The company offers a complete line of spray etchers, developers, strippers, waste treatment systems, and auxil- iary equipment. More than 15,000 Chemcut units are currently in oper-
ation around the world. Standard Printed Circuits, Inc. is headquar- tered in Sherburne, NY. The compa- ny, founded in 1967, is an Aerospace Certified manufacturer of printed circuit boards for military/defense, telecommunications, medical, indus-
trial and instrumentation industries. Contact: Chemcut Corp., 500
Science Park Road, State College, PA 16803 % 800-243-6288 or 814-272-2800 fax: 814-272-5205 E-mail:
bluebox@chemcut.net Web:
www.chemcut.net
See at IPC/APEX Booth #1819. See us at APEX, Booth 628
2130 Victor Place Colorado Springs, CO 80915 USA 1-800-530-8377
Website:
virtual-ii.com Email:
info@virtual-ii.com
V See us at APEX, Booth 2947 Press Fit 864-582-7506—South Carolina 603-934-2770 — New Hampshire
WWW.INSULFABTOOLS.COM FLEX CIRCUIT LED ARRAY HAND SOLDER
Page 1
Page 91
Problems with WAVE PALLETS SMT CARRIERS PRESS FIT
Looking!
InsulFab PCB Tooling will help smooth the road to profitable manufacturing. Talk to our engineers to find out how.
SMT Carriers Wave Pallets
?
•Handlesparts assmall as.004” •ESDsafe • Variety of interchangeable tip sizes and materials •Numerousmodels tochoosefrom - Tabletop 110 or 220 volt systems -Compressedairornitrogenunits -In-housevacuum sourcehandtools - Portable battery operated systems •Made intheUSA
LEAD TRIM MATRIX TRAYS BGA REWORK CABLE ASSEM- BLY
CONFORMAL COAT
AOI/5DX
VACUUM FIXTURES ROUTING
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108