Page 40
www.us-tech.com CelsiStrip® CelsiPoint® Temperature Recording Labels
Apply and Forget Until You Inspect! Irreversible Temperature Recording Labels
Choose from a combination of forty levels +105°F (40°C) to +550°F (260°C). Accuracy ±1,5 %.
Exposed above their specific temperature switch levels,
the original white sensitive
spots turn permanently black. Provides in warranty discussion a positive proof of exceeded temperatures.
Request FREE samples.
sat@spirig.com
All types are available from stock. The CelsiStrip® (CS) tacked by its self-adhesive layer to the brake saddle of
a HP-car indicates that during some experimental braking cycles this surface had been heated to a maximal level of 54°C. The still original white tempera- ture levels had not been reached. Only the Celsi® temperature sensing labels allow to set up within minutes such a quick, easy to apply, truly low cost tem- perature measuring / recording tool.
The Micro-CelsiStrip® (CSM) applied to the IC pack shows the originally white tem- perature sensible spots 60°C and 71 °C permanently (irreversible) blackened. A clear documented proof that these two temperature levels had been exceeded in the past. The still white 82°C and 93°C have not reached their specific switch levels.
3S-Wick® Desolder Braids Test-the-Wick Prices / 5ft Spool, any Size US$ 0,99*
MOQ <Test 3S-Wick Price> 100pc 5ft spools, assorted sizes US$ 0,99 / spool + shipping
3S-Wick® Desolder Braids <Desoldering Tools on a Spool > Produced by Spirig now for over 35 years
* Patented wick technology. Use for lead free and standard solder alloys. * RoHS / REACH tested. Approved by SGS.
* Balanced thermal mass reduces heat shocks on sensitive components. * Very long shelf life. 'No Clean' technology. * Available on rolls with 5 / 50 / 82 ft. (1,5 / 15 / 20 meters). * Distributors: Private label designs accepted.
3S-Wick® Patent Portefolio: 4,416,408 4,323,631 4,164,606 4,078,714 4,081,575 4,133,291 4,227,415 Re 32,086
How to Use: Gently press wick end with hot iron tip on the solder to be removed. The solder should melt by the heat stored in tip mass and not primarily depend on electric heating power. Too small a tip mass slows desoldering process. 3S-Wick® is not a low mass wick. 3S-Wick®s balanced thermal mass dampens those deadly heat in- jection caused temperature shocks stressing sensitive components. Temperature rise is gradually. Capillary forces will draw the melting solder into the wick. Cut off
wick end to expose fresh desoldering capacity. SPIRIG
WWW.SPIRIG-USA.COM Distributed by: Spirig Advanced Technologies Inc., (SAT)
144 Oakland Street, Springfield, MA 01108 Phone: 413-788-6191 Fax: 413-788-0490 Tollfree: 866-977-4744 E-mail:
sat@spirig.com
March, 2012
40°C 43 46 49 54 60 66 71 77 82 88 93 99 104 110 116 121 127 132 138 143 149 154 160 166 171 177 182 188 193 199 204 210 216 224 232 241 249 254 260°C
file:TI2CS-LS_1-1_SAT-2012
2012 -> 32 YEARS SPIRIG USA
2012 -> 43 YEARS SPIRIG SWITZERLAND
2012 -> 32 YEARS SPIRIG USA
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108