xii UK Focus - Gas Detection Rental Solution for Old Landfi ll Gas Analysers


As rental partner for Geotech, a leading gas analyser manufacturer, Ashtead Technology has an effective, low-cost solution for customers dealing with gas analyser obsolescence. For example, Geotech landfi ll gas analysers fi rst manufactured in 1999 have now been replaced and updated to incorporate the latest technology, such as GPS and Bluetooth. For users of these much older analysers, the facility to rent instruments from Ashtead Technology’s fl eet of the latest models, provides a smooth transition from redundant instruments to the latest technology.


The analysers manufactured before February 2007 include the GA2000, GEM2000, GA2000 Plus and GEM2000 Plus analysers with serial numbers from GA4999 to GA09149. Geotech’s aim is to service these analysers for as long as possible after the last analyser is manufactured (typically, the life of an analyser is 10 years), but this series of analysers was fi rst manufactured 14 years ago, and the cost of replacement parts for the original design has now become preclusive. Customers with these instruments now have the option to rent the latest models, a viable long-term option for some Ashtead Technology customers.


Ashtead Technology’s Jay Neermul believes that renting provides a good opportunity to upgrade to the latest technology: “The new GA5000 landfi ll gas analyser is now the most popular in our hire fl eet; partly because it is Ex approved, but also because it provides highly accurate readings (+/- 0.5% for CH4 and CO2


) in half the time of its predecessor.”


The GA5000 is also smaller and lighter with a new colour screen that works in all light conditions and features new intuitive menus, with a choice of languages, which guide users through the measurement process.


New Hand Held, Re-Chargeable Ozone Monitor For More Info, email:


For More Info, email: email:


email: For More Info, email: email:


27696pr@reply-direct.com


The new hand held, re-chargeable ozone monitor from Envin Scientifi c detects ambient levels of ozone. If the detected levels exceed the set alarm level the monitor will activate the Alarm LED and sounder, giving both a visual and audible warning.


The ozone sensor itself is a pre –calibrated device and the ozone alarm levels of the monitor can be factory set to any alarm value up to 250 ppb. The default alarm setting is 180 ppb. When the monitor is initially turned on it waits in a non-monitoring state until power up checks are completed, after which it begins sensing ambient ozone levels. For ease of maintenance the pre-calibrated ozone sensor can be removed and replaced without the need for returning the complete unit to the factory.


27640pr@reply-direct.com


For More Info, email: email:


Does your Gas Detection System Need a Health Check?


If you’re the health and safety manager on site you want to know that your plant and employees are protected at all times.


At any point your employees could be exposed to fl ammable, toxic and oxygen asphyxiate hazards and the only thing standing between you and these gas hazards is your gas detection program. It goes without saying that your gas detection system should be considered an important aspect of the overall integrated safety plan.


All gas detection applications can vary and with this so do the factors that contribute to the health of your gas detection system. The most common failure in gas detection systems and in particular with catalytic sensors, is performance failure due to sensor exposure. However, this isn’t a factor that can be seen by the human eye as faults like this require calibrations and bump testing.


A vital part of avoiding sensor degradation and other common issues is periodic servicing, maintenance and calibration. Although there’s no specifi c legislation pertaining to the frequency of servicing, it is still the responsibility of the safety professional on site to ensure proper working gas detection system.


Therefore it is essential to have a routine maintenance and calibration program for your gas detection system.


Our Promise


Provide us with any like-for-like quote and we will beat it!


a1-cbiss ltd have recently launched a free gas detection system health check campaign. This is designed to assess the condition of your fi xed gas detection system and provide recommendation for how to carry out routine maintenance. The free gas detection system health check from a1-cbiss delivers insight to your gas detection system with the aim of helping you to set up or expand your current maintenance plant with the long term goal of maximising safety.


We’ll come out to site at a time that suits you to conduct a free full examination of your current gas detection system (even if we didn’t install or supply it). Using our knowledge that we’ve gained from our 25 years in the industry, we’ve created a diagnostic check list to examine all aspects of your gas detection system.


Once the health check has been completed we will generate a complete report that’s unique to your gas detection system, highlighting any issues that may need attention as well as discussing any concerns that we may have.


You can keep a copy of the fi ndings for your own records and if there’s anything else you wish to discuss we will be more than happy to help.


shop.a1-cbiss.com 0151 666 8300 | sales@a1-cbiss.com


For More Info, email: email:


IET Advert GASTEC March.indd 1 IET March / April 2014 www.envirotech-online.com


For More Info, email: email:


For More Info, email:


Gastec price promise requires a valid like-for-like competitor quote from the last 30 days. Subject to company discretion. Not to be used in conjunction with any other existing discount or offer.


678ad@reply-direct.com 17/03/2014 16:50:20


Paul Morgan, Sales and Service Manager at a1-cbiss ltd is instrumental in carrying out the health checks. With over 20 years spent in technical industries he has knowledge of a wide variety of gas analysers


“Our health check will help you put an action plan in to place; it doesn’t matter if your system is one or fi ve years old the health check will help to determine if your fi xed gas detection system is fi t for purpose. The check is non-invasive and looks at factors such as gas sensor location. We’re aiming to reduce the cost and time associated with checking your system, whilst still providing you with peace of mind that you can rely on your detection program. We want to provide you with free advice from the experts in gas detection to guarantee the safety of the plant.”


For More Info, email: email:


29200pr@reply-direct.com


Match Detector Tubes Shop with Gastec’s No. 1 UK Distributor


Price Gastec Gas


 NEW Search by gas @ shop.a1-cbiss.com  Over 500 different gas tubes to choose from  Extensive stock holding guarantees fast delivery


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76