CEM 2014 Preview - Air Monitoring
Measuring the Total CO2 Emission in the Stack
A new accurate method for determining the CO2 -emission has been developed
and taken into use in a Finnish coal power plant. The emission is measured by using a continuous CO2
The calibration uncertainty of the total CO2 -concentration measurement in the stack and a stack gas
fl ow measurement. The good traceable accuracy is reached by accredited on-site calibrations of these components.
-emission was 1,8 %, well under the
uncertainty limit of 2,5% set by the EU regulations for the yearly emission. By measuring the CO2
-emissions directly from the stack the plant can avoid costly
sampling and analysis of the raw material. The method is applicable to all coal power plants using natural gas or fuel oil as their secondary fuel. Indmeas (Finland) will present the method in detail at the CEM conference on 15th of May at 2.10pm.
Portable Tools for the Analysis of VOC’s and Emissions
For More Info, email: email:
For More Info, email: email:
Pollution srl (Italy) is an experienced designer and manufacturer of analytical tools for the on-site chemical analysis of volatile compounds. Since 1991 Pollution srl has put its efforts into designing ground-breaking products and today it is a leading company in microGC and emissions FID technologies.
You are invited to visit their booth #35 at Istanbul’s CEM from May 14th to 16th. During the fair, you will have the chance to discover some of their products, including:
POLARIS FID, a TUV certifi ed on-site portable TOC Analyser for
Stack Emission Monitoring. It is a fully portable heated FID instrument and it incorporates everything needed for full onsite analysis. Along with stack monitoring, it also performs environmental screening and it is perfect as a portable, effi cient solution to monitor needs in intense environments.
GCX MicroGC, based on microgaschromatographic technology. The GCX with its 19-inch rack chassis confi guration is the ideal tool for online applications and continuous monitoring. Compared to the classical lab gas chromatographs, the GCX signifi cantly speeds up the analysis time: it performs a complete analysis of permanent gases (H2
, O2
hydrocarbons and olefi ns (C1-C5 and C6+) in less than 160 seconds.
29312pr@reply-direct.com
Integrated Computer System for CEM Values
For More Info, email: email:
For More Info, email: email:
Qualist’s (Turkey) Green Chimney is an integrated system of software and hardware that is ready to care for your values. It collects, archives and reports mission values, as per the Continuous Emissions Monitoring Systems (CEMS).
Specifi cations: Fulfi lls the online monitoring requirements of the CEMS Declaration; web-based access, accessible by all computers within the network through a standard Web Browser; centralised reporting transfers the facilities data to Provincial Environmental Directorates; Zero &Span, CUSUM Records Zero &Span Measurements Data and automatic sensitivity detection with CUSUM Account’s integration.
Benefi ts include: Collection of emission sensors data in accordance with the
CEMS Declaration, instant access to history records of all processes, automatic preparation of CUSUM charts, data recording and reporting in Excel fi le format, easy viewing of past average emission rates in one page, Screening the advantage of using alternative fuel and correction possibility under critical circumstances through logical warnings.
Reliable and Durable Gas Conditioning Components
For More Info, email: email:
For More Info, email: email:
JCT Analysentechnik GmbH (Austria) is in the fi eld of gas conditioning and emission monitoring. Their product range covers all parts needed for effective and effi cient gas sampling including everything from heated sampling gas probes, heated lines and sample gas coolers – also for portable applications and where ATEX certifi cation is needed.
With a global network of distributors and OEM partners, JCT products and solutions are successfully deployed in leading power generation plants, the cement, mineral, iron & steel industry, the manufacturing industry, waste incinerators and also authorities, institutes and universities.
Today JCT is more than 20 years in business and well known for technically
superior, reliable and durable gas conditioning components and effi cient after-sales-service worldwide. Visit JCT Analysentechnik GmbH at CEM 2014 on booth 33.
For More Info, email: email:
For More Info, email:
29313pr@reply-direct.com
For More Info, email: email:
www.envirotech-online.com IET March / April 2014
For More Info, email: email:
www.chromatotec.com
Certified mCerts Name European EN 14662-3 (2011)
29304pr@reply-direct.com , N2 , CO, CO2 ), saturates
Bruker Remote Sensing Systems allow for analysis of gases, liquids, and solids. In addition, HI 90 and SIGIS 2 are imaging spectrometers, adding mapping capabilities.
All systems utilize ruggedized Bruker FT-IR interferometers assuring unsurpassed reliability and accuracy and are available in mobile configurations for field applications.
Contact us for more details:
www.bruker.com/remotesensing
www.BrukerOpenPath.com
For More Info, email: email:
Innovation with Integrity
2085ad@reply-direct.com
For More Info, email: email:
E x p e r t i n G a s A n a l y s i s
OPS - Open Path Air Monitoring System
FT-IR
SIGIS 2 - Scanning Imaging Remote Sensing System
29310pr@reply-direct.com
Remote Sensing High Performance FT-IR Systems
▀
Identification and Quantification of Pollutants and Hazardous Material
▀
High-Precision Quantification of Trace Gases
▀ Cloud Imaging
▀ Air Quality Monitoring ▀ Fenceline Monitoring ▀ Emission Measurement ▀ Leak Detection
▀ Volcanic Gas Analysis
EM 27 Remote Sensing FT-IR
HI 90 - Hyperspectral Imaging System
Are you launching a new product at CEM 2014? Please email us today.
info@envirotechpubs.com
17
Instrumentation for on-line measurements
Continuous monitoring and analysis of VOC and Sulphur compounds in Ambient Air and in Water
Emission and process gases
New Trap GC-MS-FID instrument for ambient air monitoring designed for onsite use
Industrial Environment
Fenceline Refinery
CEM Safety
Process
info@chromatotec.com
1884ad@reply-direct.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76
