080
TECHNOLOGY / SUSTAINABILITY
SUSTAINABLE SOCIETY
Henrietta Lynch interviews Alan Tilla, new president of the Society of Light and Lighting (SLL)
How do you think that the SLL/CIBSE will support its recognition of the trend towards sustainability and low energy design?
CIBSE has identified delivering working, low carbon built environments as one of its key issues for the future. Whilst legislation is important, it must have clear and realistic goals. Even more, if building owners are to meet the demands of Part L (UK Building Regulations – The Conservation of Fuel and Power), the Energy Performance of Build- ings Directive (EPBD) and comply with the Carbon Reduction Commitment (CRC), the ability to measure energy performance is essential. There is a danger of a gap open- ing up between what gets designed and the final performance – post-occupancy feed- back is essential. There are two main ways of delivering low energy design. The first is through education and training so that buildings are operated by skilled, knowl- edgeable engineers. The second is ensuring compliance with regulations. Currently, this is a seriously weak link in meeting our carbon reduction targets.
In terms of lighting, the major reduc- tions in energy saving must come through refurbishment of existing buildings. New build, alone, won’t meet the targets. As I mentioned in my Presidential Address, there is a groundswell of authoritative opinion saying that recommended task illuminance levels could be reduced. This is quite simply recognition that laser printed documents and high contrast VDTs are easier on the eye than third sheet carbon copies or 4H pencil lines on tracing paper. Controlling the light- ing is also immensely important. The most inefficient light source is one that is on when it should be off.
What do you think could be improved in terms of lighting requirements in future iterations of Part L? Firstly, the new revision of Part L (October 2010) is beginning to get close to what is achievable from the luminaire and lamp. Apart from the top end manufacturers, there is not much on the market that meets a delivered 55lm/cw. You can achieve it with expensive optical materials, but
other than that, you are looking for a lamp efficacy of about 80lm/W or more. That pretty well limits you to T5 and higher wattage metal halide. The weakness of Part L is that it is based on total load and takes very little account of controlling energy use through dimming or switching off when luminaires are not needed. The SLL and other professional lighting bodies including trade associations prefer the adoption of EN15193 which looks at total consumption per annum. I want to emphasise that energy saving and aesthetics are not mutually exclusive concepts. It is only when good design is linked to lighting quality that you achieve long lasting energy savings. Profes- sional lighters just need to work smarter in future.
Do you think that lighting design and daylighting design should be taught to ar- chitects and other non-lighting engineers? Architects should certainly be taught much more about daylighting than they are at present. Daylighting is our only completely low carbon, sustainable light source. It must be remembered that artificial lighting is a necessity in buildings. As the electrical load caused by heating and cooling reduces due to better insulation and building tech- niques, the lighting component will take on even greater importance. Again, linking the daylight to artificial lighting via intelligent control is crucial. I might add that it isn’t just architects who should be taught about lighting. Building services engineers should also understand its importance. Speaking personally, as a dyed in the wool lighter, I think lighting is even more important than football! Everyone should understand the importance of light for their health, wellbe- ing and, of course, pleasure.
What part has the EU played in influenc- ing the UKs sustainability agenda? Pan European legislation is hugely impor- tant. We are accustomed to the Waste Electrical and Electronic Equipment (WEEE) directive at the end of a product’s life. The Energy Using Products/Effected Power (EuP/ERP) directives affect its design and manufacture. The EPBD affects how the
New SLL president Alan Tulla
products are used. Related to this is other legislation such as Restriction of Hazardous Substances (RoHS) directive and the work of bodies such as the Central European Com- mittee for Standardisation (CEN) and the In- ternational Organisation for Standardisation (ISO). Sustainibility and climate change isn’t just about flooding in England. Without in any way wishing to diminish the importance of events in the UK, thousands of people across the world die due to climate change. We are all in this together.
Where do you think the biggest gaps in lighting design education lie? The biggest gap is in the holistic approach that is required to achieve truly sustainable lighting designs. Too many courses either concentrate on the engineering or the aesthetics. This is due, in part, to the way our education system is run. It’s a cliché, but the appeal of lighting design is that it combines both art and science. Much like sustainable design, lighting must be multi- disciplinary.
One last thing I would like to say is that artificial light is a necessity. We cannot live our lives the way we do without it. Artificial light requires both materials and energy. It is our duty as lighting profession- als, therefore, to minimise its impact on our environment.
www.cibse.org.uk
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132