Title
Show preview: IPC Midwest 2009
Technology preview:
What’s on the show floor?
Global SMT & Packaging magazine brings a preview of just
some of the innovations and new technology to be showcased
on the exhibition floor at IPC Midwest 2009.
IPC Midwest
September 23-24, 2009
Renassiance Schaumburg
Hotel & Convention
Center, Shaumburg,
Illinois
ipcmidwestshow.org
ace production Technologies—
booth 633
ACE Production Technologies introduces
aqueous Technologies—booth 411
its new SMART Conveyor that controls
Aqueous Technologies Corp. is bringing
PCB warpage during the selective soldering
its SE500™ 3-D solder paste inspection
its Trident III automatic defluxing and
process. ACE’s SMART Conveyor auto-
sysetm and its Flex High-Resolution
cleanliness testing system to IPC Midwest,
matically senses and adjusts to board size,
automated optical inspection (AOI) system.
as well as its Zero-Ion G3 cleanliness tester,
then “crowds” the PCB for a snug fit to
CyberOptics redefines inspection speed
designed to test electronics assemblies
ensure accurate board location. Then, the
with the SE500 — a new 100 percent 3-D
for ionic contamination. The Zero-Ion
SMART Conveyor automatically clamps
solder paste inspection system. This system
uses a dynamic technology that provides
the two parallel edges and re-sizes the hold-
has the ability to inspect the most demand-
automatic regeneration of the machine’s
ing area while exerting gentle pressure that
ing assemblies with a >80 cm2/second
test solution, maintaining a high degree
eliminates any board shape issues.
inspection speed that does not compromise
of test solution sensitivity. The Zero-Ion
www.ace-protech.com
measurement accuracy and repeatability.
also has been determined to be 3.7 times
Flex HR is an enhanced resolution AOI
more sensitive than the manual resistivity
ascentech—booth 633
system with inspection performance for
of solvent extract (R.O.S.E.) test. The Zero-
Ascentech is exhibiting its new ultrasonic
01005 components and larger.
Ion performs cleanliness tests automatically
SMT stencil aperature cleaner, GENSON-
www.cyberoptics.com
and is capable of storing 50 test parameters
IC, manufactured by GEN3 Systems.
within its internal controller.
www.ascentechllc.com
essemtec—booth 704
www.aqueoustech.com Essemtec is premiering the PANFLEX2, a
cyberoptics—booth 301
highly flexible high-speed pick and place
CyberOptics Corporation is exhibiting
42 – Global SMT & Packaging – September 2009 www.globalsmt.net
Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56