Vol. 63, No. 3 autumn 2018 238
need to model the interior. Using the drawings I built a master with a wooded core and styrene keel and gunwales. Even though these boats required rudders I did not include them as they normally were stowed inside the boats when not in use. I did include the pintles and their straps. Photos 379 and 380 show the master without the pintles. T e imperfections of the prototype were not pronounced enough to include on the master. Nevertheless, I kept some slight imperfections in the texture of the master’s hull. A two-part mold was necessary. (Photos 381 and 382) T e sheer of the gunwales required the top of the mold to follow this curvature, so, when I poured the lower half of the mold, I had to fi ll the space above the sheer line with molding clay. I also fi lled the
382. T e top portion of the mold. Note the holes for the release of the excess resin.
380. T e master for the life boat.
383. T e molding clay dam required to make the bottom half of the mold.
corners of the mold wall to minimize the amount of mold rubber required. (Photo 383) Notice that the top of the mold has holes through which excess resin could escape when the top of the mold was forced into the bottom. Photo 384 shows the resultant copy and the cradles being prepared for attachment. T e copies were solid, which consumed a lot of the resin, but, in this case, my supply was aging and needed to be used up.
381. T e bottom portion of the mold.
One of the diffi cult things to reproduce well is boat canvas covers. My solution, though not perfect, worked well. Photo 385 shows one of the lifeboats resting on its cradles and covered with Saran wrap. T e ridgepole supported the cover to prevent water
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100