Page 72
www.us-tech.com
June, 2017
H2W Intros Linear and Rotary Positioning Stage
Santa Clarita, CA — H2W Technol - ogies has introduced its SRS-080-10- 020-01-3EXRTS, a six-axis position- ing stage that consists of three rotary motors, with encoders, each mounted to three independently moving linear axes.
The new pos ition ing stage is use-
ful for applications that re quire inde- pendent mul tiple motions on a single travel plane. Each linear axis uses an H2W
FULL - SERVICE Quality is never an accident y EMS PROVIDER PROVIDER
BLDM-D06 brushless linear motor to generate continuous/peak forces of 24.8/74.5 lb (110/331N), with each moving table capable of a total stroke length of 6.8 ft (2.08m). Each linear axis has an independent, non-contact 1 µm resolution encoder head that reads a single encoder scale allowing for precise positioning using any multi-axis motion controller. Each moving table is guided by a rigid recir- culating ball linear bearing block sharing a single linear bearing rail. Each rotary axis consists of a
standard 34-frame rotary stepper motor with a 40,000 counts/rev reso- lution encoder. Using a state-of-the- art motion control electronics package provided by H2W, each rotary stepper motor can operate as a two-phase
Six-axis positioning stage.
it was mounted. This allows for larger payloads on each linear axis. The entire stage is assembled
on a single piece of aluminum extru- sion, thus reducing the overall weight of the system. It has end-of- travel rubber bumper stops, a home positioning sensor, end-of-travel-sen- sors, and custom mounting holes are
available upon request. Contact: H2W Technologies,
Inc., 26380 Ferry Court, Santa Clarita, CA 91350 % 888-702-0540 E-mail:
info@h2wtech.com Web:
www.h2wtech.com
Excelsys Adds PMBus
eimicro.com sales@eimicro 507 345 5786
eimicro
sales@eimicro.com 507.345.5786
Comms to Power Supplies
Hampstead, NH — Excelsys Tech - nologies' CoolX600 series of 600W convection-cooled modular power supplies is now available with PMBus™ (power management bus) communication. In addition to being a PMBus adopter, Excelsys is a mem- ber of the System Management Interface Forum (SMIF). PMBus is an open standard
If you need it fast,call Ninja! 24-48 SHIPS IN SHIPS IN HOURS
power management protocol that offers system builders a standard way to communicate with power con- verters over a digital communica- tions bus by providing a full set of commands and data structures required by power control and man- agement components. The CoolX series PMBus inter-
face facilitates the communication of operating parameters, such as out- put voltage, output current and internal temperature, with other PMBus-enabled devices. It also pro- vides the remote adjustment of parameters, such as output voltage level and current limit as well as con- trol features, such as power supply and individual output enable/inhibit. The convection-cooled CoolX600
CAPABILITIES
Proof of Concept Quick Turn
Consignment / Turnkey One Time Build
SERVICES
Proof of Concept NPI
Material Procurement
series delivers 600W of output power — without fan-assisted cooling — in a compact package. Typical efficiency is greater than 93 percent and, according to the company, it typically offers a 25 percent longer lifetime than competi- tive power supplies. A five-year war- ranty ensures quality, reliability and a low total cost of ownership. For higher system reliability
and enhanced thermal performance, the CoolX series can be equipped with system fans or additional exter- nal conduction cooling. Other fea- tures include 4 kV input surge immunity and the ability to with- stand input voltages of up to 300 VAC, making it suitable for use in remote locations and those subject to input-voltage disturbances.
CoolX600 series power supply. Contact: Excelsys Technologies
Ltd., 80 Bricketts Mill Road,
Hampstead, NH 03841 % 972-771-4544 fax: 603-329-4204 E-mail:
salesusa@excelsys.com Web:
www.excelsys.com
TWEET US.
If it’s important to our
readers and followers, we’ll webpost it and pass it along.
@ustechglobal Additional features include
SEMI F47 compliance and operation at 5,000m (16,404 ft)altitude. A 25W standby power output is standard.
rotary brushless motor. Each motor can generate a continuous torque of 27.1 oz-in. Each rotary axis is remov- able, which, in turn, reduces the mov- ing weight of the linear axis to which
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88