December, 2016
Waterloo, Ontario, Canada — Teledyne DALSA is presenting its new BOA™ Spot ID vision sensors — the latest in its series of low-cost and easy-to- integrate vision solutions for the factory floor. BOA Spot ID combines 1D/2D code reading with OCR and verification tools for a number of product iden- tification and verification applications, including quality control, traceability and logistics manage- ment, and product validation. The sensors are available in two models. A
standard IDS model includes the core 1D/2D decoders, while the expanded IDE model adds advanced direct part marking (DPM) decoding, OCR and verification tools. These new vision sen- sors can decode 1D barcodes with bar widths and spacing down to 1.5 pixels and 2D matrix codes with cell or dot sizes down to 2 pixels. Image filters and control parameters are provided to enhance readability of poorly printed codes and codes print- ed on plastic or metallic surfaces using laser/chem- ical etch, ink jet or dot peen marking methods. Grading algorithms are included for verifying
Altech Offers All-in-One UPS Power Solution
Flemington, NJ — CBI all-in-one UPS (uninterruptible power supply) power solutions from Altech® com- bine multiple functions in a single device for use as a power supply unit, battery charger, battery care module, or as a backup module. The device is compatible with a range of common battery types and is fully equipped with a real-time diagnostics system to continuously monitor battery sta- tus, charging levels, and potential battery faults. The CBI device suits battery-power applications in any setting where battery reliability and backup power are essential. The CBI UPS device is available
in 12, 24 and 48 VDC output versions for pairing with conventional battery types, including open lead acid, sealed lead acid, lead gel, and nickel- cadmium (NiCd). The device has three charging levels (recovery, boost and trickle), allows for adjustment of charging current from 20 to 100 per- cent of output current, and automat- ically distributes available power between load and battery. Efficiency up to 91 percent is achieved through its switching technology. The device’s battery-charging
function is microprocessor-controlled and uses algorithms to detect a bat- tery’s condition and then choose the appropriate charging mode. Real- time diagnostics enable easy battery diagnosis and fault identification dis- played by LED to protect against potentially occurring faults, such as short circuit, inverted polarity, over- load, or disconnection of the battery. If the CBI device ever becomes dis- connected from the main power source, the battery will serve to sup- ply the load until battery voltage reaches 1.5V per cell, preventing deep battery discharge. The CBI device performs over a wide tempera- ture range from –40 to +70°C (–40 to +158°F) and is housed in a compact and rugged metal case offered in three sizes. The device can be DIN-rail
mounted using its built-in bracket. Contact: Altech Corp., 35 Royal
Road, Flemington, NJ 08822 % 908-806-9400 fax: 908-806-9490
E-mail:
info@altechcorp.com Web:
www.altechcorp.com
www.us-
tech.com
Page 73 Teledyne DALSA Presents Low-Cost Vision Sensors
the quality of decoded symbols against ISO/IEC and AIM industry standards. Like earlier models, the BOA Spot ID combines the power and flexibil- ity of a BOA vision system with integrated LED lighting, lens cover, and easy-to-use software to deliver high value capabilities at a low cost of own- ership. Its robust build quality with IP67 rating makes the BOA Spot ID suitable for harsh indus- trial conditions. Inspections using BOA Spot vision sensors
can be triggered by parts in motion or from a PLC after being moved into a stationary position. Standard factory protocols, such as EtherNet/IP and PROFINET, are directly supported for com- municating with third-party equipment or the fac- tory enterprise. Through-hole and surface mount options, along with a slim form factor allow the
BOA Spot to fit into tight places. Contact: Teledyne DALSA, Inc., 605
BOA Spot ID vision sensors.
McMurray Road, Waterloo, Ontario, Canada N2V 2E9 % 519-886-6000 fax: 519-886-8023 Web:
www.teledynedalsa.com
Vacuum Tweezer Solutions
For nearly thirty years we have been a leading supplier of vacuum handling solutions to the world’s high technology fi rms. Our patented ESD safe products are used by CLASS I clean room personnel, electronic assemblers, semiconductor manufacturers, the optics industry and universities around the world. Our success comes from developing innovative manual vacuum handling tools and pick-up tips based on customer requests and customer feedback. These tools provide customer specifi c solutions that make assembly and processing operations more productive and ergonomic. Parts range in size from 0.13mm (0.005”) up to 300mm (12.0”) for easy handling.
• Self-contained vacuum tweezers
• Portable, battery-operated continuous vacuum handling systems
• Bench top 110/220 volt vacuum tweezer systems
• Low cost options
These hand tools replace tweezers and other gripping means for many applications, making them ideally suited for ergonomic manipulation of parts during assembly, inspection, rework and service operations.
Virtual Industries offers a broad line of accessories including miniature rubber vacuum cups, PEEK wafer handling tips, and precision machined handling tips for critical handling operations.
Visit our website or contact us for additional information.
2130 Victor Place, Colorado Springs, Colorado 80915 USA Website:
virtual-ii.com E-mail:
sales@virtual-ii.com USA Telephone: 719-572-5566 Fax: 719-572-5504
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84
