Page 70
www.us-
tech.com
December, 2016 Matrox Adds Industrial I/O to PCs with Indio
Montreal, Quebec, Canada —Matrox® Imaging has launched its Indio I/O and communication card for vision applications. The PCIe x1 add-in card offers discrete I/Os with real-time syn- chronization and industrial network- ing using the EtherNet/IP, Modbus®,
and PROFI NET protocols, turning any PC into a vision controller. With eight inputs and eight out-
puts, the Indio provides jumper- selectable signaling in both 24V and TTL-level standards, making it suit- able for both industrial and laborato-
ry use. I/Os are optically-isolated and the outputs have resettable fuses to safeguard against damage from unintended use. Configurable for both sinking and sourcing, the I/Os are accessed from a standard 37-pin D-sub connector. Delivering real-time input/
output management through a dedicated hardware-assisted mech - anism, the Indio enables precise timing of output events, based on either elapsed time or specific input events. Input events can be received
directly from a discrete input, including from a rotary encoder or from a count derived from a dis- crete input. Output events can be stored on a hardware based list, and can be triggered by a discrete input event or one of multiple cas- cading timers. The Indio also makes a gigabit
the cabling required. Designed for use with both the
Matrox Imaging Library (MIL) 10 SDK and the newly launched Matrox Design Assistant 5 flowchart-based integrated development environment
Indio I/O and communication card.
Ethernet port (RJ45) available for industrial networking using the EtherNet/IP, Modbus, and PROFI - NET protocols. To ensure a timely response, PROFINET communication is hardware-assisted. Alternatively, the port can connect to and power a GigE Vision® camera by way of Power over Ethernet (PoE) support, reducing
(IDE), the I/O card provides system integrators and machine builders the ability to fully-utilize Matrox vision
software in their PC of choice. Contact: Matrox Electronic
Systems Ltd., 1055 St. Regis Boulevard, Dorval, Quebec, Canada H9P 2T4 % 514-822-6000 fax: 514-822-6363 E-mail:
imaging.info@
matrox.com Web:
www.matrox.com
LEMO Improves Watertight Connector Series
Rohnert Park, CA — LEMO has recently improved the design of its T series watertight (IP68) connectors. The outer shell design has changed from the company’s standard look and the connectors now have three latches instead of two. The series offers an innovative
solution for defense/security, test and measurement, medical and any other application that requires a watertight connection. The connec- tors are small and use the same orig- inal LEMO push-pull technology. Based on the LEMO B series, the T
NEW FOR 2017
The worlds best selling selective soldering machine just got even better...
JADE MK IV
Entry-level single point selective soldering system
With all the proven features of the Jade Mk II, the Jade Mk IV sets even higher standards of performance.
NEW FEATURES:
Motorised auto solder top-up (wire feed) and solder level detect Enhanced PillarCOMM interface Automatic fiducial correction Auto-nozzle tinning system New solder bath and pump design 24”x24” board handling size
NEW OPTIONS: Bottom-side instant IR heater
Pillarhouse INTERNA TIONAL
Pillarhouse International Ltd.
www.pillarhouse.co.uk Tel: +44 (0) 1245 491333 Email:
sales@pillarhouse.co.uk
Pillarhouse USA, Inc.
www.pillarhouseusa.com Tel: +1 847 593 9080 Email:
sales@pillarhouseusa.com
Pillarhouse (Suzhou) Soldering Systems Co., Ltd.
www.pillarhouse.cn Tel: +86 512 6586 0460 Email:
sales@pillarhouse.cn
Pillarhouse... Expect innovation T series IP68-rated connectors.
ward-compatible with the B series, with the same receptacle panel-hole diameter, which benefits customers looking to upgrade existing designs. The connector outer shell is
available in black chrome finish or plated brass, making the product suitable for defense systems such as aircraft communications, land vehi- cles, night-vision equipment, simula- tion or personal battle equipment, as well as in test and measurement and other industries where environmen- tal conditions require ruggedized
equipment. Contact: LEMO USA, Inc., 635
Park Court, Rohnert Park, CA 94928 % 707-206-3776 fax: 707-206- 3774 E-mail:
jcarlson@lemo.com Web:
www.lemo.com
series has been specially constructed with an inner sleeve and extra seal- ing to provide its IP68 water protec- tion. The connectors are available in two- to nine-contact configurations. Contacts can be terminated by sol- dering to the wire, crimping onto the wire, or directly to a PCB. A keying system ensures correct connector alignment and the connector outer shell offers full EMI shielding. The T series of connectors uses
the same high-performance contact system and configurations as the popular LEMO B series, providing a wide selection of options that can be made available quickly. It is back-
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84
