Page 72
www.us-
tech.com
December, 2016
KOA Speer: New Metal Plate Current Sense Resistor
Small Screws Big Results Micro Screw-Tightening Solution
.
Our new JR-V Screw Tightening robots will feed and fasten M1 to M2 screws reliably and repeatedly. The integrated vacuum pickup provides clean screw pickups each time. Error handling allows retry or skip conditions.
• • •
Tighten & confirm torque
Easy-to-use
• Optional PC software
Tighten consistently
Choose from 200mm x 200mm or 300mm x 300mm work areas. Use it for mobile device, HDD, and smart phone assembly.
Mobile Device | Smart Phone | Electronics
Scan our QR Code to collect the contact information below
JIE-USA, Inc. 892 Cambridge Drive Elk Grove, IL. 60007 847-357-8870 office | 847-357-8890 fax
sales@janome-ie.com www.janome-ie.com
Bradford, PA — KOA Speer Elec - tronics has introduced its TLR2BP current sense resistor with a 1.5W power rating in a 1206 package. The TLR2BP is a metal plate resistor that provides excellent dimensional accuracy and low height with a thick- ness as low as 0.6 mm (0.024 in.). In addition, it offers superior corrosion and heat resistance with an operat- ing temperature of –65 to +170°C (–85 to +338°F). KOA Speer’s TLR2BP resistor
has low TCR available down to ±50 ppm/°C with resistance tolerance of ±1 percent. The TLR2BP is offered in resistance values of 1 mW up to 20 mW and is AEC-Q200 qualified. Used primarily for current
detection, the TLR2BP current sense resistors are suitable for use in transportation, industrial, telecom- munications, and consumer electron-
ics markets in applications such as personal computing devices, DC-DC conversion, automotive modules,
TLR2BP current sense resistors
motor control, and power supplies. Contact: KOA Speer Electronics,
Inc., 199 Bolivar Drive, Bradford, PA 16701 % 814-362-5536 fax: 814- 362-8883 Web:
www.koaspeer.com
CUI Adds USB to Interconnect Portfolio
Tualatin, OR — CUI has expanded its portfolio of power, audio and sig- nal connectors with the addition of a USB product line. The new connector family incorporates USB 2.0 and 3.0 connectors available in Type A, Type B, Micro AB, Micro B, Mini AB, and Mini B versions. Able to support data rates of up to 5 Gb/s in the USB 3.0
new USB line contains a number of mounting styles that include surface mount, cable mount, mid-mount SMT, and through-hole, allowing them to plug into virtually any design. All models are rated for 30 VAC,
and have current ratings of 1 or 1.8A, along with reliability as high as 10,000 mating cycles. Color insulator options
Test for gross and fine leaks in as little as 6 minutes.*
USB connectors.
models, the new product family is suitable for a variety of I/O applica- tions in consumer and portable elec- tronic devices, including mobile com- puting equipment, digital audio devices and high-volume storage products. Offered in jack or plug connector
types with horizontal or vertical ori- entations depending on the model, the
of black, blue and white are also offered. The USB connectors have an operating temperature range of –25 to +85°C (–13 to +185°F) and are RoHS-
compliant. Contact: CUI, Inc., 20050 SW
112th Avenue, Tualatin, OR 97062 % 503-612-2300 fax: 503-612-2383
E-mail:
jschnabel@cui.com Web:
www.cui.com
Laser Research Optics Intros Sapphire Cover Windows
Only NorCom optical leak technology detects both gross and fine leaks in hermetically sealed packages, this fast. Instead of using multiple technologies
and processes, you can leak test virtually any type of package with one high-speed system. The NorCom 2020™
series inspects hermetically sealed components to
MIL-STD 883 requirements either in seam seal trays, or when already mounted to circuits boards and assemblies. It automatically rejects failed devices, and reports the leak rate for each part, eliminating “divide and conquer”leak testing.
NorCom 2020™
Try it free. Send us your package samples today, for a leak test evaluation and report at no charge. *Note: Test time is dependent on package volume
www.norcomsystemsinc.com
610-592-0167 1055West Germantown Pike Norristown, PA 19403 USA
Providence, RI — Laser Research Optics, a division of Meller Optics, has released a line of sapphire cover glass windows and lenses for industrial cut- ting lasers that are reportedly more durable than fused silica, reducing the need for cover glass changes. The company’s sapphire fiber
laser windows have a Mohs hardness rating of 9, which is second only to diamond, and have A/R coatings on both sides to provide transmission of greater than 99.5 percent at 1.06µ, with greater than 90 percent at 650- 670 nm. Suitable for use as shields on 1064 nm cutting lasers, these highly-polished sapphire windows are capable of withstanding steel splatter, flash and debris. Available in sizes from 0.5 to 2 in. (12.7 to 50.8 mm), the windows have a 10-5 scratch-dig finish and provide a 1/4 wave transmitted wavefront. Sap -
Sapphire fiber laser windows. phire C-Plane windows are also
offered coated on one or both sides. Contact: Laser Research Optics,
120 Corliss Street, Providence, RI 02904 % 888-239-5545 E-mail:
scott@laserresearch.net Web:
www.laserresearch.net
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84
