December, 2016
www.us-
tech.com
Page 61 AVX Releases Multilayer Organic Low Pass Filters
Fountain Inn, SC — AVX Corporation has released a new series of low-profile, low pass filters, based on the company’s patented
stacked passive devices, such as inductors and capacitors, with high volumetric efficiency, high Q, and exceptional electrical performance. Designed to support both a
wide frequency range (0.4 to 6.5 GHz) and several wireless stan- dards, LP series low pass filters have an ultra-low 0.55 mm (0.02 in.) height profile, and exhibit excellent isolation, low insertion loss, low parasitics, and 50W impedance, making them suit- able for use in a variety of wire- less applications,
including
mobile communication devices, GPS, vehicle location systems, wireless LAN, satellite receivers, and instrumentation. With land grid array sur-
LP series low pass filters.
multilayer organic (MLO®) high-den- sity interconnect technology. The new LP series MLO low pass filters use a combination of high dielectric constant and low-loss materials to enable the fabrication of multilayer,
face-mount packaging expan- sion-matched to most organic PCB materials, AVX’s MLO low pass filters also deliver improved reliability over standard silicon and ceramic devices, including low-temperature co-fired ceram- ic (LTCC) devices, which can also
be used to create multilayer stacked passives. RoHS-compliant, the filters are
currently available in four versions with varying lengths and fixed widths and heights, and are supplied
NDC Pick-and-Place and Plasma Treatment Systems
Ivyland, PA — NDC is now offering two new systems, the Air-Vac ONYX29DB pick-and-place machine for semiconductor assembly, and the PINK V6-G low-pressure plasma treatment system. The ONYX29DB is a versatile
and precise tabletop unit that can perform a wide variety of tasks including dispensing, pick-and-place, assembly, and sorting. The system is beneficial for manufacturers with high-mix, low-volume products. The automated system is designed specif- ically for semiconductor assembly including flip-chip and die bonding, and can handle MEMS devices, opti- cal component placements and very small components, down to 200 µm2. Its powerful 2,000W top heater deliv- ers hot gas to the die area with tem- peratures ranging from 50 to 450°C (122 to 842°F), allowing for thermo-
features of the system include a vacu- um pump, ozone trap, up to two addi- tional gas inlets, rotary drum for the treatment of bulk material, shelves, lateral microwave coupling, soft start and slow vent, and a VPN/USB/ Ethernet interface and controller for
remote maintenance. Contact: Neu Dynamics Corp.,
110 Steamwhistle Drive, Ivyland, PA 18974 % 800-910-8150 fax: 215-355-7365 E-mail:
sales@neudynamics.com Web:
www.neudynamics.com
Voids Flux Residue Slumping Printing problems Short stencil life
Eliminating these problems starts with the flux. Higher quality flux means better solder joints, and high quality flux starts with powder.
• •
At Shenmao, we make our own powder. We ONLY use virgin powder.
That’s why 11 of the 12 largest EMS companies in the world use our solder paste!
with gold terminations that are com- patible with automatic, reflow, wave, vapor phase, and manual soldering processes. The series has an operat- ing temperature range of –55 to +85°C (–67 to +185°F), can be
shipped in waffle or bulk packaging and has a lead time of approximately
12 weeks. Contact: AVX Corp., One AVX
Boulevard, Fountain Inn, SC 29644 % 864-967-2150 Web:
www.avx.com
Suffering from any of these Solder Paste Problems?
Over 40 years of experience that you can count on. 408.943.1755
Our Solder Paste is blended in the USA
www.shenmao.com |
Smart change. Switch to a PCB-technology offering new dimensions in miniaturization.
More freedom in Design. More features.
Ask for DenciTec® – Swiss engineered technology. Tabletop pick-and-place system.
compression bonding and reflow. The gas is delivered through standard and custom nozzles, and a quick- change design allows them to be swapped out easily without tooling. The PINK® V6-G is a low-pres-
sure tabletop plasma treatment sys- tem for industrial small series produc- tion as well as for plasma treatment in R&D laboratories. It can be used for surface treatment process cleaning and activation and its integrated PLC stores process parameters. Optional
EUROPE
Advanced Microelectronics & Substrates T +41 32 843 05 00
info-europe@cicor.com
Electronic Solutions T +41 71 913 73 73
info-europe@cicor.com
AMERICA
Cicor Americas Inc. T +1 617 576 2005
info-americas@cicor.com
ASIA Cicor Asia Pte Ltd. T +65 6546 16 60
info-asia@cicor.com
Den Tec
is a registered Trademark of Cicor Group.
Headquarter:
cicor.com T +41 71 913 73 00 I
info@cicor.com
®
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84
