TECH SKILLS
Ford F-150 Gets Cleaning Boost;’68 Charger New Custom Dash; Subaru Impreza Remote
Start Tricks By Rob Elliott, Executive Director — In Car Experts
Clear2Drive Heated Washer Fluid System Install on 2007 Ford-150 By In Car Experts ››
(1) 2007 Ford F-150 4DR Truck
The heater will be mounted to the lower fender well. To gain access, the wash fluid reservoir and battery must first be removed. Note the location of the bolts for the reservoir.
(2)
Once the battery is removed, the battery tray must be unbolted. Here the four bolt locations (two lower and two upper) are noted.
(3)
With the battery and battery tray removed, the wash fluid reservoir can be moved to the battery location giving access to the lower fender well location.
(4)
Be sure to test-fit the unit first, checking to clearance for the washer fluid hoses and power wire. Check under the fender well for obstructions and electrical or hydraulic lines that could be damaged by drilling or screws.
62 Mobile Electronics February | March 2012 (5)
Using at least two of the four mounting tabs, securely mount the bracket to the inner fender.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68