Page 68
www.us-
tech.com
June, 2016 Elite Feeder Solutions
Intros Label Feeder for Pick-and-Place System
Reading, UK — Elite Feeder Solu - tions, a provider of specialized feed- ers for the SMT and robotics indus- tries, has introduced its 30 mm (1.2 in.) Slimline label feeder. The feeder has been designed to save space in a pick-and-place system. Label feeders typically have a
THIS IS RELIABILITY
CHO-TOUCH EMI SHIELDED TOUCHSCREEN LCD DISPLAYS
Integrated EMI Shielding with LCD display for fast design cycle
Projected capacitive touchscreen for simple interface Complete assembly for reduced design complexity
CHO-TOUCH LCD Displays have been designed to reduce time to market and simplify the customer design experience. Parker Chomerics integrates touchscreens, EMI shielding, optical bonding and high performance LCDs into a complete assembly that is ready to go out of the box.
www.chomerics.com/optical chomericsoptical@parker.com
width of about 60 mm (2.4 in.). However, most of the labels used in electronics production are very small, with a maximum size of 9 x 9 mm (0.4 x 0.4 in.). In order to occupy the smallest amount of valuable space in the pick-and-place system, these new label feeders have been trimmed down and offer a variety of additional benefits. The Slimline feeders have a
teach-in function; the label length can be taught and adjusted easily as required. In addition, the feeder counts the labels it transports. With an adjustable failure indicator, the user is able to define the number of undetected labels the feeder counts before switching over to error mode. The feeder has a selectable trigger, which uses a light sensor, is activated manually, or activated by the pick- and-place machine. Also, the feeder’s
transport speed can be set easily. A well-designed guide enables
easy label threading. The empty liner material is collected in a waste
30 mm Slimline label feeder for pick-and-place system.
box that can be taken off easily with- out stopping the pick-and-place machine. The Slimline feeders are currently available for ASM, Fuji and Panasonic pick-and-place sys- tems, with additional interfaces
under development. Contact: Elite Feeder Solutions,
5 Trafford Road, Reading, RG1 8JP, UK % +44-0-1189-584-600 E-mail:
info@elitefeedersolutions.com Web:
www.elitefeedersolutions.com
Rogers Adds to ROLINX® Busbar Family
We can provide what you need.
Rogers, CT — Rogers Corporation, a specialist in the area of power electron- ics solutions, has introduced two new capacitor-busbar assemblies to its Rolinx® busbar family, the Rolinx CapEasy, and Rolinx CapPerfor mance. Both products enhance the per-
formance of Rogers’ Rolinx laminated busbars with Power Ring Film Capacitor™ technology from SBE, Inc., which has a circular shape and low equivalent series resistance, as well as low equivalent series induc- tance. The result is higher reliability, lower total system cost and increased power density due to lower overshoot voltages and less µF/kW required for total capacitance. The CapEasy and CapPerfor -
mance busbar assemblies can be used for a variety of applications, including HEV/EV powertrains and solar and wind power inverters. The compact assemblies are well-suited for DC link applications where relia- bility is critical. The high-power-den-
PC Board Lab Assurance in Indianapolis
The Right Time The Right Place
Verified to Your Specifications
international, llc
Sales@divsys.com PH: 317-405-9427
www.divsys.com
ISO 9001:2008 • WOSB • Woman Owned Certification • ITAR
sity busbar assemblies help mini- mize weight and volume without compromising system power han- dling capabilities. They have typical voltage ranges from 450-1,500 VDC,
Capacitor-busbar assemblies.
and typical capacitance ranges from 75-1,600 µF, with capacitance toler- ance held within ±10 percent. Both assemblies can handle power in
excess of 1 MW. Contact: Rogers Corp., 1
Technology Drive, Rogers, CT 06263 % 860-774-9605 fax: 860-779-5509 Web:
www.rogerscorp.com
Pulse Adds White Antenna to Clarity™ Family
pany’s PIM inator® line of DAS anten- nas, the PIM performance has a rating better than –155 dBc at 2 x 20 W (2 x
San Diego, CA —Pulse Electronics has introduced the Clarity™ white anten- na and added it to its Clarity family of DAS, ultra-thin, ceiling-mount, omni- directional antennas. An extension of the popular family, the white antenna is a low-cost, high-performance anten- na that is able to fit aesthetic require- ments of many buildings and public places. The new family covers cellular bands 608-2700 MHz. Like all the products in the com-
243 dBm). The antenna extends 0.33 in. (8.4 mm) below the ceiling, and has a slim, 9.41 in. (239 mm) diameter. The Dasclin sert adapter allows a blind-hole installation in the ceiling with a simple one-eighth turn-and- lock rotation. The adapter does not induce PIM and does not affect the
low-profile installation. Contact: Pulse Electronics
Corp., 12220 World Trade Drive,
San Diego, CA 92128 % 858-674-8100 fax: 858-674-8262 E-mail:
antennas.us@
pulseelectronics.com Web:
www.pulseelectronics.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88