This page contains a Flash digital edition of a book.
December, 2014


www.us- tech.com DTS: Triaxial Angular Rate Sensor


Seal Beach, CA — DTS (Diversified Technical Systems, Inc.) has intro- duced its new ARS3 PRO Triaxial Angular Rate Sensor. With the new sensor, measuring the durability of a lever or capturing drive shaft speed in a manufacturing machine can be done without the need for a slip-ring. Life-cycle product testing, like a car door, is easy and portable with embedded DAS and a tiny sensor. The ARS3 PRO is especially suitable for testing products like sports hel- mets or hockey sticks that have tight space constraints, all without affect- ing the test dynamics. Unlike an accelerometer that


measures linear motion, the ARS3 PRO can be used to quantify virtual- ly any object’s position in space, which starts with angular rate meas- urement. The ARS3 PRO makes it easy to accurately measure high rates of angular velocity, even in excessive shock and vibration envi- ronments. Rugged and ultra-small, three angular rate sensors are pack- aged in a sealed enclosure capable of withstanding impacts up to 10000 g. The triax gyroscope measures


Precision Linear Stage from PI


Auburn, MA — PI’s new M-417 linear stage provides 500mm travel and half-micron resolution. This motor- ized precision positioner can be com- puter-controlled for automation and precision assembly applications. The linear translation stage can handle high duty cycles and provides a high velocity of 100mm/second. Precision recirculating ball bearings provide


HUNDREDS OF SUPPLIERS


MILLIONS OF IDEAS


100+ SPEAKERS


45+


EDUCATION SESSIONS


Precision linear stage.


guiding precision in the 100 µrad range over the complete travel range. The low friction ball screw with a


2mm thread pitch allows for mainte- nance-free operation and the integrat- ed highly efficient PWM servo amplifi- er improves cost efficiency while sim- plifying installation and operation; no extra amplifier is required. The M-417 can be driven by the company’s minia- ture, palm-top C-863 Mercury servo motion controller. An incremental optical rotary


encoder with 4000 counts/rev is in control of the position, providing uni- directional repeatability of 0.5µm. Non-contacting reference point and limit switches protect the mechanics from damage. The M-417 stage is 120mm wide


and 56mm high. Its stress-relieved aluminum base ensures the stage’s high stability. This low-profile posi- tioning stage is well suited for automa- tion and precision motion control


applications for science and industry. Contact: PI (Physik


Instrumente) L.P., 16 Albert St., Auburn, MA 01501 % 508-832-3456 E-mail: info@pi-usa.us Web: www.pi-usa.us


February 10–12, 2015 Anaheim Convention Center | Anaheim, CA


ATX has automation solutions you need today and the inspiration for tomorrow.


Whether you’re searching for a solution right now or looking to jump start your idea process for the future, ATX is the ideal event for you. With hundreds of knowledgeable suppliers, educational and networking opportunities, AND something no other automation expo has—access to seven other related manufacturing events and features—you’ll fi nd ideas and solutions around every corner.


Get your badge today! 29385_W_ATX15


FIND MORE IDEAS AND CONNECTIONS AT THESE FREE SHOW FEATURES:


ATXwest.com/RSVP


For a complimentary expo badge, use source code TL when you register. Share with your Colleagues!


Co-located with:


just 19 x 19 x 12.5mm (0.75 x 0.75 x 0.49-in.) and weighs only 9g (0.35 oz). For applications requiring three independent sensors to measure pitch, roll and yaw, this design elim- inates the need for a mounting block that consumes additional space and adds weight. The result is a self-con- tained triaxial package that costs 25 percent less, is 50 percent smaller and 40 percent lighter than even three DTS ARS PROs combined in a mounting block. The sensors are available with


range options of ±300, 1500, 8K, 18K, 50k°/sec, a variety of bandwidths, DC response, up to 10,000 g shock rating,


and shunt check capabilities. The ARS3 PRO is suitable for high energy applications such as vehicle crash


safety, in-dummy testing, human impact studies, and aerospace and ballistics measurements. It also meets the latest U.S. government dynamic performance requirements. For sensor applications requir-


ing six degrees of freedom, DTS offers the 6DX PRO that has three angular rate sensors and three accelerometers in a rugged enclosure that measures 19 x 19 x 14.5mm and


weighs 12 grams. Contact: Diversified


Technologies, Inc., 1720 Apollo Triaxial angular rate sensor.


Expand Your Horizons, Zero in on Solutions


Court, Seal Beach, CA 90740 % 562-493-0158 Web: www.dtsweb.com


Page 75


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80