Page 46
www.us-
tech.com
December, 2014
ATEX Certified Linear Position Transducers
Pennsauken, NJ — When specifying sensors, engineering contractors, system manufacturers and even end- users must not only ensure sensor operating specifications meet appli- cation requirements, but also vali- date if components address regulato- ry and safety requirements for the country or geographic region in which they will be installed or used. Sensors certified domestically
HIGH VOLTAGE ADJUSTABLE OUTPUT MODULES DC-DC Converter • 100-1500 VDC Output
New SAR Series!
High Voltage Isolated 100 to 1500 VDC Output Adjustable, Down To 0 VDC Output Output Power 3 Watts
Minature Design: 1.1” x 0.8” x 0.4” ht. 12 grams Typical Weight Surface Mount & Thru Hole Models Available Output Center Tap for Dual Output Use See PICO’s full line catalog at
DC-DC CONVERTERS
www.picoelectronics.com 143 Sparks Ave., Pelham, New York 10803
Call Toll Free 800-431-1064 • FAX 914-738-8225 E Mail:
info@picoelectronics.com
8/7/14 11:52 AM Page 1
From Pluggable to High Power Terminal Blocks
ZST Pluggable Tension Spring Connection System
are not necessarily acceptable for use overseas, especially in haz- ardous areas such as those found in oil and gas applications, nu- clear power plants, subsea as well as mining. In many coun- tries, sensors must comply with specific national requirements to ensure safety and prevent acci- dents or disasters. ATEX certification is issued
gies offer ATEX-approved LVDT Lin- ear Position Sensors and Pressure Sensors that are manufactured and certified to operate under explosive and hazardous conditions. When selecting a specific LVDT
linear position transducer or pres- sure sensor, sensor users must be fully aware of the intended environ- ment and location of its application. Look for the certification symbol, as
only after a sensor is tested to the relevant standards applicable for each type of explosion protection ap- plied to the equipment, such as flameproof, dust proof or intrinsical- ly safe devices. ATEX certification is typically the responsibility of the sensor manufacturer that uses a no- tified body for ATEX certification. Macro Sensors and its sister company American Sensor Technolo-
Certified linear position transducer.
shown above, on units or, if in doubt, ask the sensor manufacturer for clar- ification if the component is ATEX
certified. Contact: Macro Sensors, 7300
US Route 130, North Building 22, Pennsauken, NJ 08110-1541 % 856- 662-8000 fax: 856-317-1005 E-mail:
positionsensors@macrosensors.com Web:
www.macrosensors.com
Passive Plus Now Lot Codes All Leaded Caps
Huntington, NY — Passive Plus, Inc., (PPI) in another industry first, now provides as standard, lot code marking on all leaded capacitors. Lot traceability is easily lost during the manufacturing process; there- fore lot code marking of individual leaded capacitors will facilitate fail- ure analysis and corrective actions when necessary. In addition, the company pro-
vides lot code information for every line item on its shipping paperwork. With over 30 years in the RF/Microwave industry, Passive
Plus, Inc. manufactures high quality, high power passive components using state-of-the-art manufacturing tech- niques. Specializing in magnetic and non-magnetic hi-Q capacitor product lines, PPI supplies reliable quality components to the aerospace, telecommunications, medical semi-
conductor, and military industries. Contact: Passive Plus, Inc., 45
Whitson Rd., Huntington Station, NY 11746 % 631-425-0938 fax: 631-425-0847 E-mail:
sales@passiveplus.com Web:
www.passiveplus.com
HSKG High Power Stud Terminals
...and Everything In Between
Conta-Clip, Inc. offers a comprehensive line of high quality terminal blocks for applications ranging from cable harnesses to energy transmitting applications
Available Wire Connection Types: • Screw Connection System • Pressure Spring Connection System • Tension Spring Connection System • Stud Connection System • Spade Connection System
Wire Range: • 0.5 mm2
to 300 mm2
For more ZST and HSKG product line information
Ratings: • 300V up to 1000V • 15A up to 520A
Approvals: • UL
• CSA • IEC
• CE • GOST
• NEMKO • GL • KEMA
Call 732-564-0705,
e-mail:
info@contaclipinc.com, or visit
contaclipinc.com
usa.contaclipinc.com/ustech
NITROGEN FOR SOLDERING: BETTER.
SOLDERING: SIMPLY THE BEST.
Improve quality and lower costs with a nitrogen generator.
• Cost-saving alternative to conventional delivered nitrogen
• Ease of operation • No tanks or cylinders to switch out • 24/7 operation with same unit • Purities up to 99.9995%
CALL 888.748.3429 FOR A FREE CONSULTATION OR VISIT US ONLINE AT
WWW.ONSITEGAS.COM
35 Budney Rd. | Newington, CT 06111 NITROGEN FOR
Gas Systems
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80