December, 2014
www.us-
tech.com
Page 73
Heraeus Celcion® Products Earn UL® Recognition
West Conshohocken, PA — Heraeus Precious Metals’ Celcion material sys- tem — including a dielectric, conduc- tor, and solder mask — has been certi- fied and received recognition status by Underwriter Laboratories (UL®). According to the company, the
UL recognition gives customers the assurance that its Celcion material system meets the stringent safety and performance requirements of thermal circuit technology. Passing the certification test and meeting UL’s industry standard for flamma- bility testing is the ultimate seal of approval. Knowing that the system has passed UL’s stringent testing; Celcion has proven reliable, safe and as a highly effective alternative to traditional metal core printed circuit board (MCPCB) manufacturing and in LED thermal substrate applica- tions. The material passed some of the most rigorous tests in the indus- try to gain UL’s recognitions, includ- ing: recognition of materials for use in fabricating UL recognized printed wiring boards; recognition for solder resist for physical, electrical, flam- mability, thermal, and other proper- ties of the materials. Heraeus Celcion is a thick film
material system that was designed to produce electronic circuits for LED
Anderson Power Offers Environmental Boot
Sterling, MA — Anderson Power Products (APP) has made a new addition to the SB Environmental Boot Series, with the release of its SB®50 Environmental Boot. Suitable
lighting on aluminum (Al) sub- strates. Celcion is able to take the same fit, form and function as MCPCBs, but delivers an increased thermal conductivity and high- dielectric breakdown strength. This process incorporates a selective addi- tive deposition that uses material only where it is needed, which results in less material consumption. Using a limited amount of material and removing interface materials reduces the thermal resistance and provides a more direct connection to
the Al heat sink. Celcion circuits typically run
10°C or more cooler than MCPCBs, which allows designers an increase in lumen power output and — there- by — reduces the number of LEDs needed by up to 20 percent. This solution decreases production costs and enables customers to add anoth- er material choice for high-power applications to their design kit, with- out sacrificing performance. The Celcion material system is suitable for use in high-power appli-
cations — including high-power LED substrates (>1W input) found in gen- eral illumination, signs, signals, and displays — with distinguished per- formance benefits in power electron- ics and heaters. With the UL’s certi- fication and recognition, the Heraeus Celcion material system has proven reliable and satisfies customer and
industry standards. Contact: Heraeus, 24 Union Hill
Rd., West Conshohocken, PA 19428 % 610-825-6050 fax: 610-825-7061 Web:
www.heraeus-precious-metals.com
Call us at 858-536-5050
Your Partner for Inspection Solutions tions
Automating Manual X-Ray Inspection
Waterproof protective connector boots.
for a wide range of applications both indoors and out, the SB Envi - ronmental Boots’ soft shell provides water, dirt, chemical and UV protec- tion to SB®50 and SB®120 connec- tors. These IP64 rated, durable boots shield the connectors from water and dirt in both the mated and unmated condition. The boots are designed for both
inline and surface mount applica- tions. Mounting is achieved with the use of wire tie or band clamp. The boots have markings for easy trim- ming of the boot to accommodate the
proper wire size. Contact: Anderson Power
Products, 13 Pratts Junction Rd.,
Sterling, MA 01564-2305 % 978-422-3600 fax: 978-422-3700 Web:
www.andersonpower.com
MatriX-FocalSpot is proud to introduce a new line of industry leading manual x-ray inspection solutions which provide Traceable Inspection Capability Multiple Modes of Operation
Traceable Mode Operator Login
Barcode / Product Name Upload of Inspection Parameters
Automated Reporting by Ref Designator Automated Image Archival
AXI Mode Fully Automated Inspection of BGA, QFN Barrel-Fill, SMT, and Discretes to IPC Inspection Acceptability Standards
Verify Mode Turn X-ray On, Image, Quick Review all under 10 seconds
ystem ongurations 80/90/130 kV Sealed Microfocus X-Ray Tubes igh Resolution / Image Intensier 1k X 1k Digital 12 bit camera MIPS Analyzer Software Up to 20”x24” board handling Portable Cabinet Optional Programmable Oblique Viewing Optional Barcode Reader
Call Us for More Information or visit our website at
www.focalspot.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80