news digest ♦ Novel Devices quantum computer and spin quantum computations.”


In theory, an entire data centre could operate with virtually no electricity. “That’s probably more in theory than reality,” Luo continues, noting that other components of the centre likely would still need electricity. “But it would be far more energy efficient.” And the steep drop in electricity would also mean a steep drop in the number of coolers and fans needed to cool things down.


Luo cautions that this is still basic science. The findings may have limited application to renewable energy, but he points out that another of NREL’s key missions is energy efficiency.


The researchers’ work is described in detail in the article, “Mapping the orbital wavefunction of the surface states in three- dimensional topological insulators,” by Yue Cao et al in Nature Physics 9, 499 - 504, (2013). DOI:10.1038/nphys2685


LED device for capturing


your signature in lights A new sensor incorporating GaN (gallium nitride) could provide an artificial sense of touch and be used in biological imaging and MEMS systems


Researchers at the Georgia Institute of Technology have developed a sensor that converts mechanical pressure - from a signature or a fingerprint - directly into light signals that can be captured and processed optically.


The scientists used thousands of zinc oxide (ZnO) nanometre- scale wires to accomplish this,


The sensor device could provide an artificial sense of touch, offering sensitivity comparable to that of the human skin. Beyond collecting signatures and fingerprints, the technique could also be used in biological imaging and micro- electromechanical (MEMS) systems.


And ultimately, it could provide a new approach for human- machine interfaces.


“You can write with your pen and the sensor will optically detect what you write at high resolution and with a very fast response rate,” says Zhong Lin Wang, Regents’ professor and Hightower Chair in the School of Materials Science and Engineering at Georgia Tech. “This is a new principle for imaging force that uses parallel detection and avoids many of the complications of existing pressure sensors.”


Zhong Lin Wang holding the sensor device along with his research team in the background


Individual ZnO nanowires that are part of the device operate as tiny LEDS when placed under strain from the mechanical pressure. They allow the device to provide detailed information about the amount of pressure being applied.


Known as piezo-phototronics, the technology - described by Wang in 2009 - provides a new way to capture information about pressure applied at very high resolution: up to 6,300 dots per inch.


Piezoelectric materials generate a charge polarisation when they are placed under strain. The piezo-phototronic devices rely on that physical principle to tune and control the charge transport and recombination by the polarisation charges present at the ends of individual nanowires.


Grown on top of a GaN film, the nanowires create pixelled light emitters whose output varies with the pressure, creating an electroluminescent signal that can be integrated with on-chip photonics for data transmission, processing and recording.


“When you have a zinc oxide nanowire under strain, you create a piezoelectric charge at both ends which forms a piezoelectric potential,” Wang explains. “The presence of the potential distorts the band structure in the wire, causing electrons to remain in the p-n junction longer and enhancing the efficiency of the LED.”


The efficiency increase in the LED is proportional to the strain created.


Differences in the amount of strain applied translate to differences in light emitted from the root where the nanowires contact the GaN film.


To fabricate the devices, a low-temperature chemical growth technique is used to create a patterned array of ZnO nanowires on a GaN thin film substrate with the c-axis pointing upward.


The interfaces between the nanowires and the GaN film form the bottom surfaces of the nanowires. After infiltrating the space between nanowires with a PMMA thermoplastic, oxygen plasma is used to etch away the PMMA enough to expose the tops of the zinc oxide nanowires.


A nickel-gold electrode is then used to form ohmic contact with the bottom gallium-nitride film, and a transparent indium-tin


172 www.compoundsemiconductor.net August/September 2013


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96  |  Page 97  |  Page 98  |  Page 99  |  Page 100  |  Page 101  |  Page 102  |  Page 103  |  Page 104  |  Page 105  |  Page 106  |  Page 107  |  Page 108  |  Page 109  |  Page 110  |  Page 111  |  Page 112  |  Page 113  |  Page 114  |  Page 115  |  Page 116  |  Page 117  |  Page 118  |  Page 119  |  Page 120  |  Page 121  |  Page 122  |  Page 123  |  Page 124  |  Page 125  |  Page 126  |  Page 127  |  Page 128  |  Page 129  |  Page 130  |  Page 131  |  Page 132  |  Page 133  |  Page 134  |  Page 135  |  Page 136  |  Page 137  |  Page 138  |  Page 139  |  Page 140  |  Page 141  |  Page 142  |  Page 143  |  Page 144  |  Page 145  |  Page 146  |  Page 147  |  Page 148  |  Page 149  |  Page 150  |  Page 151  |  Page 152  |  Page 153  |  Page 154  |  Page 155  |  Page 156  |  Page 157  |  Page 158  |  Page 159  |  Page 160  |  Page 161  |  Page 162  |  Page 163  |  Page 164  |  Page 165  |  Page 166  |  Page 167  |  Page 168  |  Page 169  |  Page 170  |  Page 171  |  Page 172  |  Page 173  |  Page 174  |  Page 175  |  Page 176  |  Page 177  |  Page 178