news digest ♦ Equipment and Materials
However, the complex manufacturing requirements for III-V materials make them up to ten times more expensive than silicon. This limits their use in military applications and NASA satellites.
The award comes under the Australian Federal Government’s ‘Clean Technology Innovation Program’.
The funding was specifically allocated to the company’s ‘Versatile prototype deposition machine for higher efficiency, energy saving, lower cost LEDs on various substrates including silicon’ project. This project aims to reduce the amount of greenhouse gas emissions generated in the production of these energy saving LED devices.
BluGlass has invented a new process using Remote Plasma Chemical Vapour Deposition (RPCVD) to grow semiconductor materials such as GaN and InGaN.
This could prove crucial to the production of high efficiency devices such as next generation lighting technology LEDs with advanced low cost potential.
The company will now be able to expedite research and development into GaN on silicon substrates.
Of interest to potential manufactures, BluGlass’ unique low temperature RPCVD technology offers significant performance and cost advantages, and it is estimated that for each RPCVD tool put into production there could be a reduction in greenhouse gas emissions of more than 39,000 t CO2 equivalent per RPCVD unit (based on 3.5 million LED lamps per annum).
Taking III-V growth into the
next dimension A new process enables the relatively inexpensive growth of III- Vs. The VLS process is claimed to enable similar optoelectronic properties to those obtained by III-Vs grown using MOCVD
Engineers at the University of California, Berkeley, have developed an inexpensive new way to grow thin films of InP. This achievement could bring high-end solar cells within reach of consumer pocketbooks. The work, led by Ali Javey, UC Berkeley associate professor of electrical engineering and computer sciences, is described in a paper published in Scientific Reports, Nature’s peer-reviewed open access journal. “Performance is everything in the solar cell industry, but performance at a reasonable cost is key,” says Javey, who is also a faculty scientist at the Lawrence Berkeley National Laboratory. “The techniques we are reporting here should be a game-changer for III-V solar cells, as well as for LEDs.” The most efficient photovoltaics are made from III-V compounds.
160
www.compoundsemiconductor.net August/September 2013
Scanning electron micrograph of the InP (Credit: Ali Javey, Rehan Kapadia and Zhibin Yu)
Using this technique they demonstrated high quality 1 - 3 μm thick InP thin-films on molybdenum foils with ultra-large grain size up to 100 μm. The researcher say this is about 100 times larger than those obtained by conventional growth processes such as MOCVD. The films exhibited electron mobilities as high as 500 cm2/V-s and minority carrier lifetimes as long as 2.5 ns. What’s more, under 1-sun equivalent illumination, photoluminescence efficiency measurements indicated that an open circuit voltage of up to 930 mV can be achieved, only
UC Berkeley engineers could help make high-end solar cells, currently used in satellites and other space and military applications, affordable for consumer markets. (iStockPhoto)
The conventional growth of III-Vs requires expensive epitaxial growth substrates, low precursor utilisation rates, long growth times, and large equipment investments. Addressing this issue, UC Berkeley researchers decided to explore cheaper ways to grow the III-V material indium phosphide (InP). They demonstrated that InP can be grown on thin sheets of metal foil in a process that is faster and cheaper than traditional methods, yet still comparable in optoelectronic characteristics. The researchers used a process they call Vapour Liquid Solid (VLS) growth. In this research, the scientists deposited indium films onto electropolished molybdenum foils by either electron- beam (e-beam) evaporation or electroplating, followed by e-beam evaporation of a 50 nm silicon oxide (SiOx) cap. The Mo/In/SiOx stack was then heated in hydrogen to a growth temperature above the melting point of indium (~157°C). After temperature stabilisation, phosphorous vapour was introduced into the chamber. The diffusion of phosphorous vapour through the capping layer and dissolution in the liquid indium resulted in the precipitation of solid InP crystals.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136 |
Page 137 |
Page 138 |
Page 139 |
Page 140 |
Page 141 |
Page 142 |
Page 143 |
Page 144 |
Page 145 |
Page 146 |
Page 147 |
Page 148 |
Page 149 |
Page 150 |
Page 151 |
Page 152 |
Page 153 |
Page 154 |
Page 155 |
Page 156 |
Page 157 |
Page 158 |
Page 159 |
Page 160 |
Page 161 |
Page 162 |
Page 163 |
Page 164 |
Page 165 |
Page 166 |
Page 167 |
Page 168 |
Page 169 |
Page 170 |
Page 171 |
Page 172 |
Page 173 |
Page 174 |
Page 175 |
Page 176 |
Page 177 |
Page 178