Page 30
www.us-tech.com
December, 2012 Teledyne LeCroy Debuts HDO High Def ‘Scope
Chestnut Ridge, NY — Teledyne LeCroy is introducing two series of high definition oscilloscopes with HD4096 high definition technology — the HDO4000 and HDO6000. Oscilloscopes with HD4096 ac-
quire waveforms with high resolu- tion, high sample rate, and low noise. Waveform displays are cleaner and crisper with 16 times more vertical resolution than traditional 8-bit in- struments. Waveform details which were previously difficult to see can now be easily distinguished and measured. The HDO4000 and HDO6000 are available in band- widths from 200MHz to 1GHz. All
HDO models have a large 12.1-in. (307mm) touch-screen display and intuitive interface to enhance opera- tion; they also provide powerful debug tools, plus a full complement of automatic measurements, and waveform math capabilities. These tools include WaveScan search and find, history mode waveform play- back, sequence acquisition mode, and LabNotebook report generation. Spectrum-analysis and power-
measurement software packages ex- tend the oscilloscopes’ capabilities while leveraging their 12-bit architec- ture with its wider dynamic range and improved measurement precision.
HD4096 High Definition Tech-
nology is rooted in high-sample-rate 12-bit ADCs; amplifiers with high signal-to-noise ratios; and a low- noise system architecture. This tech- nology enables high definition oscil- loscopes to capture and display sig- nals of up to 1GHz with high sample rate and 16 times more resolution than other oscilloscopes. Precise measurements are critical for effec- tive debug and analysis. HD4096 en- ables oscilloscopes to deliver un- matched measurement precision to improve testing capabilities and pro- vide better results. In addition to HD4096 technol-
ogy, the HDO incorporates the com- pany’s ERES (Enhanced Resolution) filtering, which enables users to gain up to three additional bits of resolu- tion for 15-bit vertical resolution. The oscilloscopes provide a
sample rate of 2.5GS/s with up to 25Mpts/channel of memory — up to
Finally, a Pb-free solder paste that takes a shine to ENIG/gold PC boards.
Introducing NC-560-LF, the Pb-free no-clean solder paste designed for hard-to-solder metallization surfaces
Nothing increases production yields like AMTECH’s NC-560-LF, the lead-free, no-clean solder paste for hard-to-solder metallization surfaces, including ENIG (Gold),OSP, HASL and immersion silver
boards.This fully RoHS-compliant solder paste delivers unparalleled lot-to-lot and stencil printing consistency, and enhanced solderability due to superior print performance characteristics, including excellent wetting and activity, ideal viscosity, long stencil life, thermal stability up to 300
o C, and minimal residue. NC-560-LF
solder paste is also low beading, low voiding, and anti-tombstoning to reduce scrap and rework. Looking to strike it rich with greater hourly throughput? CallAMTECH today, and you’ll be golden.
AMTECH
www.amtechsolder.com
FI LLI NG TH E VO ID Flush cutting hand tool. The compact wire cutter that is
ergonomically designed with a cut- ting head that requires minimal squeezing equipped with soft rubber grips to simplify the job of wire har- ness assemblers. Designed for har- ness makers and electronics assem- blers, this flush cutter requires less squeezing effort and is easier to use for an entire 8-hour work shift. Streamlined and more compact than conventional compression-type wire cutters, the Model 2175 produces a clean, square cut. Rated for soft wire up to 12 AWG, this rugged tool is stamped from 0.125-in. thick metal
and heat treated to Rc 55-57. Contact: Xuron Corporation,
62 Industrial Park Road, Saco, ME 04072-1840 % 207-283-1401 fax: 207-283-0594 E-mail:
arobey@xuron.com Web:
www.xuron.com
High definition oscilloscope.
50Mpts/ch when interleaved — in two- and four-channel models from 200MHz to 1GHz. The oscilloscopes available in four-channel models de- liver sample rates of 2.5GS/s; a max- imum 250-Mpts/channel memory, and bandwidths of 350MHz,
500MHz, and 1GHz. Contact: Teledyne LeCroy Corp., 700 Chestnut Ridge Road, Chestnut
Ridge, NY 10977-6499 % 800-553-2769 or 845-425-2000 fax: 845-578-5985 Web:
www.teledynelecroy.com
Xuron: Hand Flush Cutter
Saco, ME — The Xuron® Model 2175 Maxi-Shear™ Flush Cutter has by- pass cutting action and a glare-elim- inating head which is easy on the eyes, along with soft rubber grips, and a Light Touch™ return spring.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96