Page 36
www.us-tech.com
April, 2012
Wichita, KS — Aeroflex Inc., sub- sidiary of Aeroflex Holding Corp., has made a major feature upgrade to its which now supports P25 Phase II TDMA test functions and adds many new features for the development, manufacturing, and field test of both analog and digital PMR radios and base stations used around the world. The unit is said to be the de facto world leader for testing PMR com- munications systems. Its modularity offers users the ability to test virtual- ly all PMR analog and digital radio standards within one single test sys- tem. Using the company’s Auto-Test II scripts. The unit also supports
Aeroflex Adds New P25 Phase II TDMA Test Functions The Radio Test Set software
automated testing and alignment of TETRA, P25, DMR, dPMR, NXDN™, as well as many analog legacy radio systems.
According to the company, it
has released a wide range of enhancements to 8920 emulation mode, helping customers more easily replace obsolete Agilent test sets and smoothing the transition to a modern PMR test system that supports both legacy analog systems and the new digital systems being developed around the world. The 3920 is report- edly future-proof — the only radio test set needed for almost all PMR testing requirements.
version 2.0.0 adds many new fea- tures, including: the addition of P25 Phase II TDMA operation support — H-CPM (inbound modulation) modu- lation and demodulation; H-CPM eye diagram, distribution plot, and con- stellation; H-DQPSK (outbound mod- ulation) modulation and demodula- tion; H-DQPSK eye diagram, distri- bution plot, and constellation; Generation of all H-CPM standard patterns; Generation of all H- DQPSK standard patterns; Unit- under-test (UUT) measurements for Phase II including modulation fideli- ty, symbol deviation, symbol clock
error, frequency error, power, and TX bit error; Power profile diagrams of both full slots and ramp-up/ramp- down for H-CPM modulation; New features for P25 radios have been
Upgraded 3920 radio test set.
Finally, a Pb-free solder paste that takes a shine to ENIG/gold PC boards.
Introducing NC-560-LF, the Pb-free no-clean solder paste designed for hard-to-solder metallization surfaces
Nothing increases production yields like AMTECH’s NC-560-LF, the lead-free, no-clean solder paste for hard-to-solder metallization surfaces, including ENIG (Gold),OSP, HASL and immersion silver
boards.This fully RoHS-compliant solder paste delivers unparalleled lot-to-lot and stencil printing consistency, and enhanced solderability due to superior print performance characteristics, including excellent wetting and activity, ideal viscosity, long stencil life, thermal stability up to 300
o C, and minimal residue. NC-560-LF
solder paste is also low beading, low voiding, and anti-tombstoning to reduce scrap and rework. Looking to strike it rich with greater hourly throughput? CallAMTECH today, and you’ll be golden.
AMTECH
www.amtechsolder.com
FI LLI NG TH E VO ID
added, including extended FM ana- log test functions. The product also includes Ana -
log Duplex with new IF and audio fil- ters to further emulate the Agilent 8920 test set, allowing users of this older test platform to easily upgrade. It provides support for DMR systems such as MOTOTRBO® enhanced with new analog test features. DMR radios utilize both digital and FM operational modes, and with this new release, the 3920 now eliminates the need to switch between the 3920s analog and DMR digital test modes. This feature saves time when testing and aligning DMR radios. Contact: Aeroflex Incorporated,
P.O. Box 6022, Plainview, NY 11803-0622 % 800-835-2352 or 800-843-1553 or 516-694-6700 fax: 516-694-0658 E-mail:
info-test@aeroflex.com Web:
www.aeroflex.com
Beckwood: Custom Bulldozer Presses
Fenton, MO — Beckwood Press Company is offering an innovative custom bulldozer hydraulic press with the ability to stand in close proximity to the bed. These machines
Bulldozer press.
are horizontal acting and designed for any size, stroke or configuration. Each press is equipped with bolster supports and elongated ram slide bushings for stability and can be integrated with a wide array of fea- tures and options. The company recently delivered
a 260-ton capacity bulldozer press to a leading rail industry manufactur- er. This side-acting hydraulic press is used to form, straighten and bend railroad I-beams. Contact: Beckwood Press, 889
Horan Drive, Fenton, MO 63026- 2405 % 800-737-0111 or 636-343- 4100 fax: 800-737-0444 or 636-343-4424 E-mail:
info@beckwoodpress.com Web:
www.beckwoodpress.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96