A. pH Electrode Storage Cap with Compression Fitting
Prolong the life of an electrode with the appropriate hydration maintenance. After using your electrode, rinse off the probe with the recommended cleaner, blot with soft tissue paper, then pour 1 cm of pH Storage Solution storage solution into the plastic storage cap. Place probe tip/bulb into the cap and tighten the threaded collar.
Using the probe after storage: Remove the probe from the plastic storage tube
by unscrewing the top collar to vent the cap before removing. Save cap and collar for further probe storage.
Rinse off any storage solution or salts that may be
on the glass body. Important tips: While performing maintenance and
measurement, handle the probe with care. Do not drop on a hard surface as it will permanently damage the probe. During storage or transportation, utilise the storage cap to protect and keep the pH/tip bulb hydrated.
E8R07232 pack 5 £17.01
5 PACK B. Electrolyte Solution B C
The electrolyte level in refillable electrodes should be checked before performing any measurements. If the level is low, refill with the proper electrolyte solution to ensure the correct electrode performance. This simple maintenance helps guarantee the efficiency and precision of your refillable electrodes. 230mL bottle of 3.5M KCI + AgCl.
E8R06660 C. pH Storage Solution
Use the pH Storage Solution to take care and maintain your pH electrodes resulting in a faster response times and better accuracy and repeatability.
Minimise clogging and ensure fast response time, keep the glass bulb and the junction of your pH electrode moist.
Store the electrode with a few drops of HI-70300 storage solution in the protective cap.
E8R06657 E8R06658
230ml 500ml
£31.50 £37.80
D. pH Combination Buffer Solution Kit
pH calibration pack containing 10 ready mixed sachets of pH4.01 and pH7.01 calibration solutions (5 each). Simply tear off the top and insert pH electrode or tester into the sachet.