These mini data loggers, designed by Mindsets, are an indispensable tool for all manner of investigations and experiments. All the loggers come in the form of a USB stick, so no cables are required to retrieve data or configure the device.
The sensor, memory and battery are all encapsulated on a single circuit so no additional hardware is required (battery life is estimated at 2 to 3 years and is replaceable). Sample rates can be set between once per second and once every hour, meaning the sample memory can store from 2 hours to almost a year of data!
May be used indoors or outside, or even in a liquid if protected in a self-seal bag or container.
A. Mini Temperature Data Logger
• Record up to 8,192 samples • Recommended temperature range -20ºC to +60ºC • Resolution of 0.1ºC • Can optionally set a start date and time • Inbuilt power supply - no cables required • Simple to program
E8R05750 B. Mini Light Data Logger
• Record up to 16,384 samples • Measure illuminance from 5 lux to 70 klux (logarithmic response)
• Can optionally set a start date and time • Inbuilt power supply - no cables required • Simple to program
E8R05798 £27.03 Findel… Growing education for generations 365 £27.03
Each mini data logger comes with FREE software.
The process is as follows:
1. Insert the data logger into the computer and launch the software to configure the data logger - i.e. set the frequency of the readings.
2. Remove the data logger from the computer and place it where readings are required. Readings are recorded automatically at the frequency set during configuration.
3. Insert the data logger into the computer to download the data when required.
C. Mini Acceleration Data Logger
• Record acceleration in three axis simultaneously (up to 6,144 samples per axis)
• Selectable sample rate of 50 or 200 samples per second
• Measure acceleration up to ±8g (±78.45m/s2) at a resolution of 62.5mg (0.6129m/s2) • Inbuilt power supply - no cables required • Simple to program