Appliances | Laborory Fittings A. Lift and Turn Gas Tap - 2 Way A B
Brownall Two Way 90° Lift & Turn gas tap for excellent on/off indication. Comes with all fittings for bench mounting or other horizontal surface. The tap has a flange diameter of 39mm. SPECIFICATION
Outlet Connections: Fixed serrated nozzles suitable for 8 mm to 13 mm ID rubber hose. Inlet Connection: 1/4’ BSP shank by 65mm. Construction: Fire safe plug cocks of brass constructed using grease suitable for Natural Gas and LPG.
Installation
Supply pressure should be in the range from 1.5 kPa to 5 kPa. Connection
Fitting connection is a 1/4’ BSP male threaded shank 65 mm long.
The connection end of the shank is designed to fit 8mm BS 27871 Table X tubing using a compression nut.
CP00053565 CP00053566
2 Way 90 Degrees 2 Way 180 Degrees
£92.30 £92.30
B. Pillar Angle Tap with Fixed Serrated Nozzle - Bench Mounted
Handwheel colour coded for cold water: green with blue centre. Standout: 152mm, height from bench surface: 300mm.
E8A65237 C. Swan Neck Tap GAS TAPS
Drop lever pattern with standard 3.5mm bore and tamper-proof concealed mechanism. Inlets are threaded in. BSP. Consumption 8.4 litres (0.3cu. ft.) per minute at 200mm water gauge. These taps are designed to operate on natural/ town gas mains supplies at pressures not exceeding 0.14kg cm2 (2 psi). On no account should they be used on high pressure systems.
Fixed swan neck tap, colour coded either hot or cold. The cold tap is fitted with a lever handle, allowing for hands-free operation and also benefiting pupils with impaired motor skills. Our left handed taps are ‘Hot’ and our right handed taps are ‘Cold’. Height from bench surface: 342mm. Standout: 152mm.
E8R02122 E8R02124
Hot Cold with Lever
£101.05 £101.05
D. Swan Neck Mixer Tap with Lever
Balanced flow mixer tap with a removable nozzle. Colour coded for hot and cold water. Height from bench surface: 342mm. Stand out: 152mm.