search.noResults

search.searching

dataCollection.invalidEmail
note.createNoteMessage

search.noResults

search.searching

orderForm.title

orderForm.productCode
orderForm.description
orderForm.quantity
orderForm.itemPrice
orderForm.price
orderForm.totalPrice
orderForm.deliveryDetails.billingAddress
orderForm.deliveryDetails.deliveryAddress
orderForm.noItems
STAUF WEP 180 PRIMER STAUF


STAUF WEP 180 is a multipurpose, solvent-free, dispersion- based, two-component epoxy resin primer that reinforces unstable substrates and significantly improves the strength of materials thanks to its extremely high level of penetration into mineral mortar systems. The primer has a short drying time and forms a film on the surface, which means that crumbling screeds can be ‘rescued’ very quickly and easily.


STAUF WEP 180 can also be used as a dispersion-based, two- component epoxy resin primer on cement screeds with a higher residual moisture content of up to 4 CM%. Furthermore, it is suitable for direct bonding with almost all reactive adhesives and, after being sprinkled with silica sand or having an intermediate primer coat of STAUF VDP 160 applied, it can be filled or plastered over.


These properties make the very low-emission, solvent-free STAUF WEP 180 primer, with its GEV Emicode EC1 plus status, an extremely cost-efficient all-rounder and a solver of countless problems on the building site.


www.stauf.de/en


STUBBI FLOORING TOOLS DL Marsh Industries


Stubbi Flooring Tools are an award-winning innovation developed exclusively to solve the problematic issues faced during the installation of flash-cove and cleanroom systems.


High risk/high traffic industries, particularly those of healthcare and transport, require an increasing demand for quality, problem-free installations, first time, every time, and should not be compromised by limitations within the tool industry.


Stubbi Flooring Tools mitigate this risk by removing the failure points that may start off as minor common defects, but, when left unattended, go on to lead to subfloor contamination and eventually product failure.


The application of Stubbi Flooring Tools brings a wide array of benefits. By introducing lateral cove former rolling, the cove fillet strip is deeply embedded into the floor/wall junction, removing undulations, air pockets and any possibility of movement below the cove strip. Upon application of the sheet material, the rolling process is repeated ensuring full contact is made between the backing and adhered surfaces along the coving. This allows for a uniform upturn to be created, removing the need for applied heat during installation.


The Stubbi capping tool also removes weakness in the conventional push fit application of PVC capping systems. By designing a profiled rolling surface, installers can now achieve even pressure distribution in a single pass, securing PVC strips tightly into the adhesive. This is particularly effective for water-based contact adhesive which rely on direct pressure to ensure full curing takes effect.


www.stubbiflooringtools.com https://twitter.com/TContractFloors Tweet us @TContractFloors AWARDS 2021 21


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32