“The levelling and flow
properties of Norcros 2-Part Levelling Compound make it
ideal for preparing sub floors prior to fixing ceramic or natural stone tiles.”
overlaid with 15-18mm WBP or marine- grade plywood. The product comes in a 20kg pack.
One of the most important, recent technical innovations from Norcros Adhesives has been the development of Reinforced Polymer Technology (RPT). The main benefit gained from the incorporation of RPT is that the polymer strands give reinforced flexural and bond strength, in addition to providing improved crack bridging, anti-shrinkage and thermal ageing properties.
RPT has been introduced into one of Norcros Adhesives’ levellers - Norcros Pro 50 Levelling Compound. This is
a single part, fibre-reinforced self- smoothing floor underlayment, suitable for use from 3mm to 50mm in one application, without the need for additional granite chippings. It is ideal for levelling a variety of substrates including concrete, screed, flooring grade asphalt, terrazzo and quarry and vinyl tiles. It can be used with undertile heating mats and on overlaid timber floors.
Norcros Pro 10 Levelling Compound is a single part polymer modified self- smoothing floor levelling compound. It is suitable for levelling a variety of substrates including concrete, cement: sand screed, flooring grade asphalt, terrazzo and existing quarry and vinyl tiles. It is ideal for use with under tile heating mats where it may be used to cover the wired elements, providing a level substrate to tile to and also protecting the heating elements during the fixing process.
Its strong levelling and flow properties make it ideal for preparing sub floors prior to fixing ceramic, porcelain or natural stone tiles. It has a setting time of three hours, permitting early foot traffic and fast track tile fixing. The product is designed to be used up to 10mm thick in one coat, or with the addition of single size granite chippings up to 20mm.
Alternatively, Norcros 2-Part Levelling Compound may be used from feather edge to 10mm in one application
twitter.com/TContractFloors
without the need for additional granite chippings. The product is suitable for levelling a variety of substrates including concrete, screed, flooring grade asphalt, terrazzo and existing quarry and vinyl tiles. It is ideal for use with under-tile heating mats to encapsulate the wired elements, providing a level substrate to tile to and also protecting the heating elements during the fixing process. The product is also suitable for use on timber floors overlaid with marine grade plywood.
The levelling and flow properties of Norcros 2-Part Levelling Compound make it ideal for preparing sub floors prior to fixing ceramic or natural stone tiles or soft floor coverings such as carpet, vinyl and timber. It has a setting time of 3 hours at 20C permitting early foot traffic. Ceramic and porcelain floor tiles may be fixed after 3 hours. Soft floor coverings may be fixed after 12 hours and natural stone after 48 hours.
Completing the range is Norcros Pro 10+ Levelling Compound. This is a pumpable polymer-modified cementitious single part floor leveller, suitable for use up to 10mm in one application, ready for laying ceramic or porcelain tiles after approximately three hours. Natural stone tiles and soft floor coverings such as carpet, vinyl and timber can be laid after about 24 hours.
www.norcros-adhesives.com SMOOTHING UNDERLAYMENTS | 47
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64