54 Portable / Field Testing
Added Value of Wireless Data Transmission in Environmental Applications, Automated Compost Temperature Monitoring
Increasing needs for process control, as well as growing global environmental concerns, require companies and site operators to monitor and report a very wide variety of environmental conditions. These measurements take place within and around the industrial sites to provide accurate information to local and state regulatory departments. Most measurements concern gaseous emissions or effl uent discharge and can be provided by all types of on-site instrumentation. Sensor data may include temperature, fl ow, pressure, and the composition of utilities, liquid, and exhaust discharged into the environment.
Continuous monitoring quickly allowed the identifi cation of a major improvement possibility on the operational side. The formerly slow fermentation phase required frequent attention from the site operatives.
Continuous improvement in wireless technology has made monitoring processes and environmental conditions in many locations much easier and safer with the development of autonomous devices. Personnel are no longer exposed to dangerous or unpleasant environments, and access to the data is possible at any time without sending personnel on site.
Today’s industrial wireless technology is easy to install, power grid independent, and provides several confi gurations such as simple point to point, star, or tree network topologies where multiple sensors, instrumentation, and controllers can be connected over an entire plant. Innovative powerful wireless units are perfectly adapted to the growing need for environmental data collection on industrial and waste treatment sites, coupled with diffi cult access, multiple sensing points, and hazardous EX areas in water and waste applications. A safe and cost effective alternative to traditional cables, wireless sensing devices easily bring old installations to the new technological and regulatory standards and permits data acquisition leading to better process control and improvement.
In water and wastewater applications for example, Banner Engineering’s wireless modules are used to transmit analogue or digital information from sensors and instrumentation located at diffi cult positions in the fi eld: water undergoes several stages during its treatment process, from primary treatment to coagulation, fl occulation, and clarifi cation. Instrumentation and sensors are installed at several stages of the process. One sensitive point is measuring the sludge level in the clarifi cation tank. Because the sensor is installed on the clarifi cation tank bridge, communicating the sensor information back to the supervisor is done using slip rings that do not guarantee a reliable transmission and need frequent replacement. By using a wireless node, signals from multiple tanks can be transmitted up to several hundred meters to the main control room.
A case study in Industrial Composting In modern composting, accurately monitoring the
temperature inside the windrows is essential for effi cient process control: directly correlated to the fermentation
level, temperature increases until reaching a plateau, indicating optimal turning time and
Author/Contact Details: Banner Engineering EMEA
Email:
mail@bannerengineering.com Web:
www.bannerengineering.com/eu
IET Annual Buyers’ Guide 2014/15
www.envirotech-online.com
variations tell how to adapt the forced ventilation times that are specifi c to every site. To abide regulations and for safe use as fertiliser, measuring and recording temperature is essential. In Italy for example, regulation DM 5/2/98
requires three days above 55 °C to ensure pathogens are destroyed.
Based on the innovative battery operated wireless devices developed by Banner
Engineering, a special temperature probe for compost permits an optimal monitoring of the temperature. Inserted at the very beginning of the fermentation process, the probe sends data every minute from the three sensing elements placed along the 1,5m plunger to the supervision. Data is displayed on a touchscreen controller and recorded. Formerly this was done by on-site reading that required an operator to climb on the piles to use a direct display probe or to download data from a local logger.
Alan SRL yearly composts 8 000T of digestate and green waste. The company is focused on process improvement and innovation; its plants are known for effi cient operations and advanced application of technologies for biodigestion, biological wastewater treatment and energy recovery.
On its Zinasco plant, Alan SRL wanted to improve the process and visualisation of the temperature during the initial fermentation phase. The probes are situated inside an
industrial concrete building, and the supervision and receiver are located 120 meters away. The site survey validated optimal positioning of a transmitter network between the fermentation building and the main offi ce supervision that guarantees excellent communication conditions. M. Gatti, responsible of the biogas and
composting plant says “the equipment has proven to be very reliable, without a single interruption in data measurement since begin of operations end of 2013”
Continuous monitoring quickly allowed the identifi cation of a major improvement possibility on the operational side. The formerly slow fermentation phase required frequent attention from the site operatives. This could be solved through a thorough data analysis over several weeks, combined with the possibility to visualise the temperature gradient showing behavior differences between the top and bottom of the windrow. M. Gatti says: “Having permanent measuring allowed us to identify the reason for slow fermentation. Several adjustments were made in our process control with immediately visible results in a faster composting time (about 20%). Also, by adjusting the ventilation pattern, energy savings were possible, dividing consumption by 4”.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136 |
Page 137 |
Page 138 |
Page 139 |
Page 140 |
Page 141 |
Page 142 |
Page 143 |
Page 144 |
Page 145 |
Page 146 |
Page 147 |
Page 148
