Water / Wastewater 45 New Conductivity Datalogger Introduced
Solinst Canada Ltd. is pleased to announce the latest release in their datalogger series—the Model 3001 LTC Levelogger Edge. The LTC Levelogger Edge is a compact instrument that provides reliable datalogging of water level, temperature, and conductivity measurements.
The LTC Levelogger Edge offers a number of upgraded features over previous LTC versions, including an 8-year battery life, memory for 27,000 sets of readings, higher accuracy and 6 pressure ranges. It also features a Titanium ceramic PVD corrosion resistant coating and a 3-year warranty.
The 4-electrode platinum conductivity sensor has a wider calibrated conductivity range, with autoranging from 0 to 100,000 µS/cm. Calibration is from 50 to 80,000 µS/cm, with an accuracy of ±1% above 30,000 µS/cm, ±2% between 500 and 30,000 µS/cm, and ±30 µS below 500 µS/cm.
The LTC Levelogger Edge also features greater functionality when programmed using Solinst Levelogger Software or the Solinst Levelogger App. The LTC Edge can be programmed in linear sampling mode, scheduled or event-based. There are options for programming a future start and stop time, as well as viewing real-time readings.
The LTC Levelogger Edge is compatible with Solinst Levelogger accessories including the DataGrabber data transfer device and Solinst Levelogger App and Interface. It can also be used with a Solinst LevelSender telemetry system for remote wireless monitoring with data sent via email or SMS.
The LTC Levelogger Edge is ideal for monitoring salinity and saltwater intrusion studies; road salt, agricultural and stormwater run-off monitoring; tracer tests, and providing a general indication of water quality.
For More Info, email: email:
Meter with Optical Electrodes
For More Info, email: email:
41745pr@reply-direct.com New Oxygen
New and Non-Contact Flow Measurement using Radar Technology The new and innovative SQ Flow
Meter developed by SOMMER Messtechnik allows to measure the discharge and flow rate of technical channels, semi-filled pipes, ducts, and shafts without even touching the water. Ever since it’s been a challenge to measure flow without going into the water. This new sensor proofs different. It uses the latest radar and ultrasonic technology to permanently capture the water level and the flow velocity. Based on an advanced hydraulic model and according to the actual water level, the SQ then is able to calculate the exact flow rate of the waterbody.
Based on SOMMER’s long lasting experience in hydrology and environmental monitoring the new SQ is especially dedicated for wastewater and sewage applications. Temporarily submersible, with a tight and water-proof housing that is resistant to also aggressive environments and fluids, it is a perfect fit for wastewater treatment plants as well as industrial applications and monitoring of cooling or process water. There is not mounting-construction inside the water needed and different interface connections such as RS-485, SDI-12, Modbus, pulse signal or analogue signal allow an easy system integration with any PLC.
For More Info, email: email:
Early identification of Harmful Algal Blooms (HABs) is key to mitigating their effects and protecting public health. Turner Designs’ CyanoFluor is a new handheld fluorometer equipped with optics for detecting chlorophyll (CHL) and phycocyanin (PC) responses from natural water samples. CyanoFluor uses these responses to calculate and report a PC to CHL ratio for estimating the relative abundance of cyanobacteria within a phytoplankton population. By monitoring PC to CHL ratios over time, users can tell whether environmental conditions are changing, favoring cyanobacterial production which typically leads to the formation of HABs. CyanoFluor also provides raw fluorescence readings, which can be used to estimate chlorophyll concentrations.
For More Info, email: email:
CyanoFluor is factory-calibrated; no calibration standards or tools are required. Solid state optoelectronics ensure long term instrument stability. Results are displayed in less than 30 seconds and logged for future downloading. CyanoFluor is a perfect field instrument for HAB monitoring efforts – small, lightweight, battery- powered, waterproof and easy to use.
For More Info, email: email:
The Tintometer Group has enhanced its product portfolio with a new oxygen meter which utilises optical electrodes, the SD 400 Oxi L. This technology enables the most accurate and precise measurements. The instrument is equipped with an intuitive menu and enables rapid test results.
The SD 400 Oxi L is a completly newly developed instrument that has been designed for the application of treatment plants and waterworks, research and teaching, as well as fish-farming. The luminescence technology combines high measurement accuracy with low maintenance and operates without electrolyte solution.
Highlights: high measurement accuracy using luminescence technology, short response time of the oxygen electrode, low maintenance due to long-life electrode, low incident flow of the electrode – no need for stirring, incl. software for advanced and simplified data management with data logger function, backlit LC-display for measurements in any environment.
net.com www.mn-net.com
Neander-Str. 6–8 · 52355 Düren · Deutschland ternational:
CH:
+49 24 21 969-0 +49 24 21 969-199 @
mn-net.com :
info@mn-net.com
88 55 00 88 55 05
Tel.: +33 388 68 22 68 Fax: +33 388 51 76 88 E-Mail:
sales-fr@mn-net.com
EN ISO 9001: 2008 ZERTIFIZIERT
HEREY-NAGEL GmbH & Co. KG · Neumann-Neander-Str. 6–8 · 52355 Düren · Deutschland FR:
For More Info, email: email:
FR: CH:
Tel.: +41 62 388 55 00 Fax: +41 62 388 55 05 E-Mail:
sales-ch@mn-net.com
Tel.: +49 24 21 969-0 Fax: +49 24 21 969-199 E-Mail:
info@mn-net.com
40496pr@reply-direct.com
Tel.: +33 388 68 22 68 Fax: +33 388 51 76 88 E-Mail:
sales-fr@mn-net.com
Tel.: +41 62 388 55 00 Fax: +41 62 388 55 05 E-Mail:
sales-ch@mn-net.com
For More Info, email: email:
With its standard BSB flask-optimised electrode, the SD 400 Oxi L is ideally suited for the measurement of BOD in laboratories using the dilution method.
FR: Maximum transparency
n NANOCOLOR® tube tests – All information at a glance
n Fast and easy access to certificates, instructions, pictograms, safety data sheets
A App Download Scan Information B C
For More Info, email: email:
42066pr@reply-direct.com 42201pr@reply-direct.com
Handheld HAB Indicator Provides Early Warning of HAB conditions
MACHEREY-NAGEL The NANOCOLOR® App
www.mn-net.com/app
MACHEREY-NAGEL GmbH & Co. KG · Neumann-Neander-Str. 6–8 · 52355 Düren · Deutschland DE / International:
Tel.: +33 388 68 22 68 Fax: +33 388 51 76 88 E-Mail:
sales-fr@mn-net.com
For More Info, email: email:
www.mn-net.com
For More Info, email: email:
www.mn-net.com www.mn-net.com 7658ad@reply-direct.com www.envirotech-online.com IET March / April 2017
Water Analysis
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84
