WATER TESTING
testing are eliminated. Reagents are stable, have a long shelf life and are not affected by heat or cold. Interferences, false positives and phantom readings are gone. No more counting drops and you don’t need to decide on sample size. You don’t have to figure out colours and matching as the meter can determine colours many times better than your eyes.
ANALYSIS IN UNDER A MINUTE FROM LAMOTTE EUROPE
LaMotte Europe are proud to introduce an innovative new product into the international pool and spa market. The Waterlink Spin is a revolutionary professional water analysis laboratory that can achieve a full suite of water analysis in just 60 seconds. With just one sample of water the Waterlink Spin measures pH, total chlorine, free chlorine and seven other parameters of water chemistry and generates a full recommendation based report. The Waterlink Spin is faster, simpler and more accurate than anything that has gone before in the pool and spa water testing market. So how does it work? Just fill one unique Spin reagent disk with water and vital tests are done automatically.
In just 60 seconds all the test results are transferred into the DataMate 10 software and analysed to display results and recommend precise treatment instructions. Remove the disk and you are ready for the next customer.
One of a range of photometers from Industrial Test
Systems (ITS), the eXact Micro 10 offers faster, safer, easier, and more precise water testing
oxidisers, high hardness and metals. The meter is much more accurate than your eyes and it stores the last 20 readings in the memory automatically. It requires no drops, no counting and no maths. Sensitivity is 0.1 ppm – well below the maximum health department guideline for public pools and it can measure up to 11.0 ppm of free and combined chlorine.
The test could not be easier to perform.
You dip the meter into the pool water to get a sample and the sample cell automatically fills to the proper volume. You ‘zero’ the meter by pushing a button to measure a water sample with no reagents. Now you move a test strip back and forth for 20 seconds then you push a button and read the results on the meter’s large LCD display.
Almost all of the problems associated with typical liquid and dry DPD and FAS-DPD
www.swimmingpoolnews.co.uk
This ground-breaking analysis method is so simple anyone can do it. Each sealed reagent disk contains the precise amount of reagent needed to run a complete series of tests. There’s no measuring water, no vials and no prep time.
PRIMELAB PASSES ALL TESTS WITH FLYING COLOURS The ultimate tool in
water testing has arrived! Supplied by Certikin
International and designed specifically for the pool industry, the PrimeLab is a new generation photometer that can measure the complete colour spectrum with just one LED and sensor.
This means that you can test for almost any
parameter with one photometer.
Following purchase, the
PrimeLab is a new generation photometer that can measure the complete colour spectrum with just one LED and sensor
SPN February 2013 77
The Waterlink Spin from LaMotte can achieve a full suite of water analysis in just 60 seconds
customer can simply add additional parameters by downloading from the PrimeLab website via the instrument’s Bluetooth connection to a PC. This means that the photometer can be constantly updated with new firmware and software in the same way that an iPod can. The highly innovative product also comes with a desktop assistant that allows the customer or pool manager to programme data to and from the PrimeLab so that they are able to monitor each parameter, set appropriate levels for each
particular pool or location, and even track the
CRITERIA TO DECIDE BEFORE YOU MAKE YOUR TEST PRODUCT CHOICE:
• What tests do you want to carry out – which parameters are you looking to measure?
• Chlorine (or bromine for spas), pH values and alkalinity should be the absolute minimum to test for.
• A more thorough approach might be to test for Balanced Water – the Langelier Saturation-Index.
• What degree of accuracy are you looking for?
• Do you have a budget for your water testing programme?
• Are the test results for you or do you need to prepare them for a more formal audit of the pool?
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100