This page contains a Flash digital edition of a book.
case, wipe the film of lubricant from the case, and check that the expanding operation did not crack or split the neck of the case. 8. Verify that the case diameter di-


mensions are now within specifications. Check the case length since the case may have stretched and will be too long. The maximum case length is 1.760 inches. 9. If necessary, trim the cases. Be


the case’s flash hole. 6. Prepare each case for resizing by


applying a thin coating of lube/grease to each case. Be sure to coat the full length of each case. I am very pleased with the performance of RCBS Case Slick Spray Lube (part number 9315). Also, lubricate the inside of each case neck with a graphite powder or other suitable dry lubricant. These operations can be done manually and/or with the aid of various reloading accessories commonly available. 7. Use a quality full length 223


caliber resizing die. RCBS Group A, part number 11101, serves me well. Install the die into a quality press and adjust so the bottom of the die just touches the top of the case holder when the ram is fully extended. Carefully resize each


We are YOUR Nightforce Dealer!


Contact us for additional information


Also Stocking Optics By: Leupold


Michi-GUN Page 128 Spring 2012


Swarovski Zeiss


www.michigunandtackle.com


31516 Harper Avenue St. Clair Shores, MI 48082 Phone: (586) 296-2360 Fax: (586) 264-8307


Redfield, Nikon Vortex


Trijicon and Counter Sniper


sure to install the correct size bushing in the trimmer. I adjust the length set- ting so each case will be trimmed to 1.755 inches (shorter is OK). Trimming the case 0.005 inch shorter than recom- mended maximum length will allow two or three reloads before the case needs to be trimmed again. 10. Deburr the inside and outside


of the neck where the trimming took place. Leave a chamfer on the inside of the case. 11. Verify that a case from each


batch will chamber properly in the firearm. 12. Seat a bullet in one empty case


from each head stamp lot of re-manu- factured cases. Be sure the diameter of the neck is less than 0.253 inch. A larger diameter may cause the neck of the case to be pinched by the chamber of the rifle when the cartridge is chambered. Such a situation will be catastrophic when this round is fired. 13. Chamber the empty cartridge


in a rifle and make sure the bolt closes and opens without undue force.


14. Place cases in a container


and label it, noting full length resized, trimmed to length, and the date. Reloading


Before starting to reload the re-


manufactured cases, review one or more of the reloading manuals published by the bullet manufacturers listed at the end of this article. The VARMINT HUNT- ER Magazine® has many articles about the nuances of reloading for accuracy, case life, safety, etc. 1. Prime the cases per normal re-


loading practices with small rifle prim- ers. Be careful handling and installing the primers. I use a Lee Auto Prime (part number 90230). 2. Add powder to each case per


normal reloading practice. Military cases allegedly have slightly smaller capacity than commercial cases, so be sure to take that into account when selecting a powder charge. Be careful when handling powder. 3. Seat bullets of desired weight


and type being sure to check cartridge overall length. It should not exceed 2.260 inches. 4. Check neck diameter of two or


three cases per batch. Be sure it does not exceed 0.253 inch. 5. It would be prudent to fire a


three-shot group of reloaded cartridges to verify accuracy. Look for signs of high pressure, ease of extraction, etc., before loading the entire batch. 6. Place re-manufactured cartridg-


es in suitable containers that are labeled with: caliber; bullet weight, type and brand; powder type and charge weight; date of loading. 7. Second and subsequent reload-


ings should be full length sized (even though they may require only neck sizing) while simultaneously removing the used primers. 8. Head stamps on military brass


cases do not show the caliber, so the cartridges and fired cases need to be stored in containers that are clearly labeled with the caliber. Reloading Manuals Hornady: Handbook of Cartridge Reloading, 7th Edition Sierra: Rifle and Handgun Reloading


Data, Edition V Speer: Reloading Manual Number 14 Nosler: Reloading Guide 6


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96  |  Page 97  |  Page 98  |  Page 99  |  Page 100  |  Page 101  |  Page 102  |  Page 103  |  Page 104  |  Page 105  |  Page 106  |  Page 107  |  Page 108  |  Page 109  |  Page 110  |  Page 111  |  Page 112  |  Page 113  |  Page 114  |  Page 115  |  Page 116  |  Page 117  |  Page 118  |  Page 119  |  Page 120  |  Page 121  |  Page 122  |  Page 123  |  Page 124  |  Page 125  |  Page 126  |  Page 127  |  Page 128  |  Page 129  |  Page 130  |  Page 131  |  Page 132  |  Page 133  |  Page 134  |  Page 135  |  Page 136  |  Page 137  |  Page 138  |  Page 139  |  Page 140  |  Page 141  |  Page 142  |  Page 143  |  Page 144  |  Page 145  |  Page 146  |  Page 147  |  Page 148  |  Page 149  |  Page 150  |  Page 151  |  Page 152  |  Page 153  |  Page 154  |  Page 155  |  Page 156  |  Page 157  |  Page 158  |  Page 159  |  Page 160  |  Page 161  |  Page 162  |  Page 163  |  Page 164  |  Page 165  |  Page 166  |  Page 167  |  Page 168  |  Page 169  |  Page 170  |  Page 171  |  Page 172  |  Page 173  |  Page 174  |  Page 175  |  Page 176  |  Page 177  |  Page 178  |  Page 179  |  Page 180  |  Page 181  |  Page 182  |  Page 183  |  Page 184  |  Page 185  |  Page 186  |  Page 187  |  Page 188  |  Page 189  |  Page 190  |  Page 191  |  Page 192  |  Page 193  |  Page 194  |  Page 195  |  Page 196  |  Page 197  |  Page 198  |  Page 199  |  Page 200  |  Page 201  |  Page 202  |  Page 203  |  Page 204  |  Page 205  |  Page 206  |  Page 207  |  Page 208  |  Page 209  |  Page 210  |  Page 211  |  Page 212