Electronics
Metal nanoparticles are the typical means by which engineers add conductivity to inks, but they pose a toxicity risk when worn on the body.
with the risk of cytotoxicity, as nanoparticles can pass through into the deep layers of the skin and cause toxic side effects. It’s for this reason that Gaharwar settled on 2D molybdenum disulfide. “In that particular nanomaterial you have two different atoms: molybdenum and sulphur,” he explains. “If you change the ratio between the two, you can create atomic vacancies, which make the material electrically conductive as well as highly reactive to bonding.” Gaharwar and his colleagues then modified the ends of the polymers to make hydrogels with a sulphur bond. “When we mixed that together, we observed that these polymers and nanoparticles clicked together to form a covalent bond, making a stronger gel and because MoS2
is electrically conductive, it also made
the hydrogel electrically conductive,” he says. Under the skin
The implications of this could be significant. For wearable medical technologies, the benefit of a stretchable, skin-like material that is also conductive could mean more comfort for patients and a better vehicle for sensors to detect analytes in sweat and interstitial fluid. But the high biocompatibility of Gaharwar’s bioink could also open avenues for an injectable electronic hydrogel with the ability to sense muscular motion. This is the new frontier that he and the Texas A&M researchers working with him wish to reach. “We are trying to see if [the hydrogel] can be implanted inside the skin, and from there if it can sense the motion of tissues. It will get implanted into the skin and stick to the muscle, where it will get stretched and relaxed, and the changes in electrical conductivity will be sensed.”
Gaharwar frames the process as being a bit like getting a tattoo, just one that could aid in the research and detection of diseases with muscular contraction and relaxation as a symptom, like Parkinson’s. “It will be similar, but rather than a person drawing a design
88
on the skin, it will be a machine,” he says. “For Parkinson’s, we’re trying to see whether there’s a pathological feature we can detect and by getting data directly from the movement of muscles, we can better analyse what exactly is happening to the body.” Gaharwar and his team haven’t stopped at muscle sensing though, with ambitions to use the capabilities of their bioink to bridge the gap between human and robotic movement. “If we think a little further ahead, our tattoo can also act as an interface between an exoskeleton and the body,” he says. “It can sense the movement of a muscle and transport it to an exoskeletal device.” It’s not hard to imagine use cases where such a device could be life changing – volumetric muscle loss or muscle weakening due to nerve damage to name just two – but although the Texas A&M team have filed a patent on the bioink, Gaharwar admits there’s an element of future gazing to having it enable robotics. Along the path of researching the bioink, the Texas A&M team also published an open-source manual in the journal GEN Biotechnology with the express goal of democratising bioprinting among research teams. “If you want to go and do some bioprinting, a bioprinter will cost you ten thousand dollars,” he says. “To make the technology accessible to other people, we developed an open-source protocol to convert a normal 3D printer into a bioprinter.”
Bringing bioink to the people In terms of an actual roadmap towards commercialising the bioink, like most exciting new technologies in the medical world, there are regulatory barriers that require testing it over the long term. Gaharwar says the team have already done some biocompatibility studies in animal models as part of their most recent paper on the bioink, but that they’re yet to evaluate how fast the hydrogel degrades, and whether this or any other time- related factor affects the performance of the ink in situ. These longer-term challenges, he says, are currently being tested through a collaborator using more animal models. The team currently have funding for the next “two or three years”, according to Gaharwar, but they’re attempting to extend their runway by applying for grants from the likes of the National Health Institute, which he also hopes will expand the scope of research to include Alzheimer’s disease, where he believes the biocompatibility and conductivity of the bioink could assist in the firing of neurons that have lost their ability to connect with each other, once it’s injected into the right location in the brain. Gaharwar and the Texas A&M researchers will continue to validate their bioink for a range of uses, the simplest of which might be improving medical wearables, but if the more ambitious goals requiring injecting it into the body offer hope to those with incurable diseases, the future-gazing will have been time well spent. ●
Medical Device Developments /
www.nsmedicaldevices.com
Kateryna Kon/
Shutterstock.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136 |
Page 137 |
Page 138 |
Page 139 |
Page 140 |
Page 141 |
Page 142 |
Page 143 |
Page 144 |
Page 145 |
Page 146 |
Page 147 |
Page 148 |
Page 149 |
Page 150 |
Page 151 |
Page 152 |
Page 153 |
Page 154 |
Page 155 |
Page 156 |
Page 157 |
Page 158 |
Page 159 |
Page 160 |
Page 161 |
Page 162 |
Page 163 |
Page 164 |
Page 165 |
Page 166 |
Page 167 |
Page 168 |
Page 169 |
Page 170
