EMS GRIDS & TEM SUPPORT FILMS CATALOG EDITION V GRID PREPARATION SUPPLIES AND ACCESSORIES
Vacuum Systems (continued) zzz ESD Vacuum Tool
Battery-free, hand-held vacuum pick up pen designed for the safe pick-up of SMD components during assembly, test and rework processes. With fountain-pen dimensions, Vampire grabs, lifts and places components in complete safety, aided by a powerful internal piston and a full ESD protection. A complete choice of tips designed for any size of SMD component helps the operator to have always the right tool in hand. Includes: pen, conductive metal straight needle, 45° angled metal needle, conductive rubber cup 4mm, conductive rubber cup 6mm, conductive rubber cup 9 mm, and lubricant kit.
Cat. No. Cat. No. 71927-01 71927-02 71927-03 Description
ESD Vacuum Tool Kit, includes: vacuum pen, straight conductive metal needle, 45° angled conductive metal needle, conductive rubber cup 4mm, conductive rubber cup 6mm, conductive rubber cup 9mm
ESD Vacuum tool replacement set: includes: straight conductive metal needle, 45° angled conductive metal needle, conductive rubber cup 4mm, conductive rubber cup 6mm, conductive rubber cup 9mm
ESD Vacuum tool replacement set: includes: conductive rubber cup 4mm, conductive rubber cup 6mm, conductive rubber cup 9mm
zzzPorta-Wand®
The Porta-Wand kit comes with a non-removable 9.6V NiMH rechargeable battery and in-stand charger. Easy push-button on/off control. Replaceable internal air filter is accessible from the front of the tool. Internal exhaust filter ensures better than Class 1 performance. Indicator Light flashes when battery needs to be recharged, and also turn on when proper vacuum has been established.
Specifications: Battery
Vacuum
Measurements Weight
Operating Temp Charger Power Requirements
Type: 9.6V NiMH, Rechargeable, Non-Removable Charge Time: 2 hrs.; Continuous Run Time: 2-3 hrs. Recharges: Up to 1000, Factory Replaceable
15 to 20" of mercury (atmospheric pressure and elevation dependant)
Wand: 7 x 1.2 x 0.85" (178 x 30 x 21mm) Stand: 4.5 x 2 x 3.5" (114 x 51 x 98mm)
Porta-Wand: 5.44 ounces (154 grams) Charger Stand: 10.5 ounces (298 grams) Transformer: 16 ounces (454 grams) 10°C to 45°C
Supplied In-Stand Charger; Wall plug-in power
supply 24 VDC @ 500ma. Barrel jack size 5.5mm OD x 2.1mm ID. Center pin positive.
zzzPorta-Vac™ II
Ideal for handling wafers, disk media, or any item that has a flat, hard surface. A disposable 9V battery is included. Rear exhaust of the pump air is standard on these units. Features a battery low indicator. A switch setting on the bottom of the tool allows selection of alkaline battery or NiMH battery. An internal air filter (71929-05) is replaceable.
Optional battery pack and charger system available.
Specifications: Battery
Vacuum Measurements Weight
Type: 9.6V NiMH, Continuous Run Time: 3-4 hrs. Type: 9V Alkaline, Continuous Run Time: 12-15 hrs. Type: 9V Carbon, Continuous Run Time: 4-5 hrs. Type: 9V Lithium, Continuous Run Time: 36-40 hrs.
15 to 20" of mercury (atmospheric pressure and elevation dependant)
Wand: 7.3 x 1.1 x 0.80" (185 x 28 x 20mm) With Rechargeable Battery: 7.92 x 1.1 x 0.80" (200.23 x 28 x 20mm)
With Battery: 6.03 ounces (171 grams) 87
Cat. No. 71929
Description
Porta-Vac II for up to 4" (100mm) wafers, with Molded PEEK wafer tip and 9V Disposable Battery
71929-01 Porta-Vac II for up to 6" (150mm) wafers, with Molded PEEK wafer tip and 9V Disposable Battery
71929-02 Porta-Vac II for up to 8" (200mm) wafers, with Molded PEEK wafer tip and 9V Disposable Battery
71929-03 Porta-Vac II 115V In-stand Charger and 9.6V Rechargeable NiMH Battery
71929-04 9.6V Rechargeable NiMH Battery 71929-05 Porta-Vac II Air Intake Filters
Qty. each each each each
each 5/pk
Qty. kit
set set
Description
71927-04 Spare ESD 4mm cups 71927-05 Spare ESD 6mm cups 71927-06 Spare ESD 9mm cups
Qty. each each each
71927-07 Straight needle, ESD 4mm cup each 71927-08 Straight needle, ESD 6mm cup each 71927-09 Straight needle, ESD 9mm cup each 71927-10 45° angle needle, ESD 4mm cup each 71927-11 45° angle needle, ESD 6mm cup each 71927-12 45° angle needle, ESD 9mm cup each
Cat. No. 71928
Description
Porta-Wand for up to 4" (100mm) wafers, with ESD-safe flat wafer tip and 115V In-stand Charger
71928-01 Porta-Wand for up to 6" (150mm) wafers, with ESD-safe flat wafer tip and 115V In-stand Charger
71928-02 Porta-Wand for up to 8" (200mm) wafers, with ESD-safe flat wafer tip and 115V In-stand Charger
71928-03 Porta-Wand for up to 12" (300mm) wafers, with ESD-safe flat wafer tip and 115V In-stand Charger
Porta-Wand with hard anodized wafer tip 71928-04 Porta-Wand for up to 6" (150mm) wafers, with hard anodized wafer tip and 115V In-stand Charger
71928-05 Porta-Wand Air Intake Filters
Qty. each each each each
each 5/pk
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92
