EMS GRIDS & TEM SUPPORT FILMS CATALOG EDITION V LIQUID TEM
Wet “Liquid” TEM Kit (continued) K-kit Accessories
NEW zzz K-kit Folding Grids, see page 67 zzz K-kit Holder
The K-kit Holder consists of an anodized aluminum header and a stainless steel handle. The K-kit carrier fits on the header (after removing the bottom compartment). When the notch on the side of the header fits over the horizontal bar on the Loading Stage (see below), the K-kit on the carrier attached on the header will be just above the liquid sample.
Cat. No. K7263
zzzNeedle Pen
The Needle Pen is designed to facilitate the K-kit gluing operation. It has a thin needle 3.0 mm long and 0.27 mm in diameter. The thin needle makes it convenient to pick just enough glue (of the order of 0.1µl(x)
) for sealing the channel openings and (around 1µl(x) ) for mounting the copper grid. The needle is made of stainless steel. It is strong, yet slightly flexible, suitable for the job.
Notes: It is important to keep the needle free of residue glue. Please wipe the needle clean right after each use. It will be practically impossible to clean the needle once residue glue on it cures.
The needle is held in place in the pen by a set screw on the side of the pen. A replacement needle and a small Allen key are provided with each Needle Pen. The needle is sharp. Please handle with care.
Cat. No. K7265
Description Needle Pen
zzz Sample-Loading Stage
The Loading Stage consists of an anodized aluminum body. It has a horizontal bar in a recess on the side and a hole in the middle to house the Liquid Stage, which is a removable stainless steel rod. The removable design is for easy cleaning. The horizontal bar defines the rotational axis for the K-kit Holder, which has a notch on the header to fit on the horizontal bar.
Cat. No. K7264
Description Sample Loading Stage zzz Gluing Stand
The Gluing Stand has a stainless steel base and an anodized aluminum header, which is much like the header on the K-kit holder, without the notch on the side. The Gluing Stand keeps the K-kit carrier in place for gluing work.
Cat. No. K7266
Description Gluing Stand
zzzChannel Opener
The Channel Opener is used to remove the channel tips, while the K-kit stays on the carrier. It's made of anodized aluminum with a cut-off slot design at one end.
Cat. No. K7269
Description Channel Opener zzzCopper Grids
Ten pieces of Copper Grid per pack. Cat. No.
K7270
Description Copper Grid
Qty. 10/pk
Qty. each
Qty. each
Qty. each
Qty. each
zzz Accessory Box
The Accessory Box contains sealing and mounting glues, four plastic sticks, and spare parts, including a spare needle, an Allen key for the Needle Pen, a Channel Opener, and two Liquid Stages. (The label can be redesigned.)
Cat. No. K7267
zzz Starter Box
The Starter Box contains all of the essentials for K-kit loading. It consists of glues, a beaker, four stirring sticks, and two stainless steel thin needles.
Description Accessory Box
Qty. each
Needle Pen
Description K-kit Holder
Qty. each
K-kit Holder
Cat. No. K7268
zzzGlue Box
The Glue Box contains sealing and mounting glues and stirring sticks.
Notes: Glue capsules will now have a tin foil seal on the bottle mouth for shipping. Sometimes during shipping, the glue could become stained and dried on the cap or bottle mouth of the capsule. Sometimes, the Torr Seal glue will have a thin oil- like layer on the surface. This will not affect anything and is normal. Please stir first to mix evenly.
Cat. No. K7272
Description Glue Box
zzz Slide-Glass Pack Six glass slides per pack.
Cat. No. K7271
Description Slide-Glass Pack
Qty. 6/pk
69
Qty. each
Description Starter Box
Qty. each
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92
