EMS GRIDS & TEM SUPPORT FILMS CATALOG EDITION V LIFT-OUT GRIDS
zzz Carb-N-Grids™ 2 & 4 Post 3mm Lift-Out Grids
A durable carbon lift-out grid that facilitates precise Elemental Analysis.
Most common lift-out grids are made of copper, nickel, gold and molybdenum, which can all have inherent disadvantages in some scenarios. Carb-N-Grids™ facilitate precise Elemental Analysis by avoiding false peaks that can result from similar materials inside and outside samples. Their unique carbon formula eliminates the need to constantly change grid materials for like samples. In EDS analysis, the difference between the sample and the carbon grid is visible.
zzz Silicon Nitride Lift-Out TEM Windows Low-stress silicon nitride for lift-out applications Available with or without gold contacts.
State Of The Art — Our expert engineering and MEMS fabrication processes allow us to provide these one of a kind silicon nitride lift-out grids.
Open Half-Grid Shape — Our Silicon Nitride Lift-Out TEM Windows feature a large, robust window with a freely suspended side along one length of the window, providing an easily accessed edge for sample preparation and thinning to electron transparency (e.g. 50 nm or less).
Ready To Use Gold Contacts — 200 nm thick gold contacts for sample electrical biasing or heating are formatted for FIB-based sample preparation methods.
Carb-N-Grids™ with 2 Wide Posts
Schematic of Silicon Nitride Window with Gold Contacts
Carb-N-Grids™ with 2 Wide Posts and 2 Narrow Posts
z For STEM/TEM lamellae milled by FIB or FIB/SEM systems.
z No waste, unlike copper or aluminum grids.
z No false readings due to copper or other trace elements
z No fluorescence z Secure clamping without bending. z Available with both post- and V-mounting capability.
z Packaged in a holder with 10 precut grids that break off easily using suitable tweezers.
76043-01
76043-02
Ordering Information Cat No.
Description 75966-01 75966-01 Cat No. 75966-02 75966-02 Description
Carb-N-Grids™ with 2 Wide Posts and 2 Narrow Posts
Qty. 10/pk Cat. No.
76043-01 76043-02
Description
Silicon Nitride Lift-Out TEM Windows with gold contacts each Silicon Nitride Lift-Out TEM Windows
Pack each
19
Carb-N-Grids™ with 2 Wide Posts
Qty. 10/pk
A view through the electron column down onto the Lift-Out Grid is shown in image (a). In this position the Lift-Out Grid is perpendicular to its edge-on position relative to the electron beam column used to attach the lamella. A higher magnification image of the lamella and silicon nitride membrane is shown in image (b), and an even higher magnification is shown in image (c). Image (d) shows an angled perspective of the Lift-Out Grid and lamella.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92