SPONSORED BY 70 FORMULATIONS


F Mars


G Sodium Benzoate Phenoxyethanol Benzyl Alcohol


H Citric Acid Solution (50% w/w) I Sodium Chloride


Fragrance


Sodium Benzoate Phenoxyethanol Benzyl Alcohol


Citric Acid Sodium Chloride


2 0.30 3 0.50 0.50 0.40


q.s. to


pH 5.3- 6.0


q.s. to


6.000- 10.000 cps


Procedure: Pre-blend Activsoft C-17 in glycerin until smooth uniform paste is formed. Slowly add pre-blend to water in main vessel with moderate agitation, mix until fully dispersed. Add trace amount of citric acid (50% w/w) to swell guar (A). Add ingredients in phase B to main vessel and heat to 70-75°C mix until uniform (B). Add ingredients in phase C and mix until fully melted and uniform, start to cool to 50°C maintain temperature at 50°C for 2 hours to allow crystal growth and give pearlised effect (C). Remove from the heat then add sequentially ingredients in phase (D). When below 40°C add Extrapone Silk GW N and mix until uniform (E). Add fragrance and mix until fully emulsified (F). Add preservatives in (G) and mix until uniform and clear. Adjust formulation pH to 5.3-6.0 with 50% w/w citric acid solution (H). Add 0.2%w/w aliquots of sodium chloride until required viscosity reached (I). Properties: Appearance: White pearly viscous liquid; pH: 5.30-6.00; Viscosity: 6,000 -10,000 cP Brookfield RV, #4, 20°C, 20rpm; Stability: 12 weeks, 45°C, 20°C, 5°C, and 3F/T Cycles


Suppliers: 1. Innospec 2. Symrise 3. Azur Fragrances


IOI OLEO PEACHY FUZZ STICK


PHASE INGREDIENTS


A Carnauba Wax A Candelilla Wax


A DYNASAN® Crystal A SOFTISAN® 378


CONTROL L A1 COD8008 White Castor Oil Disp A1 A1


COD-8009 FD&C Yellow 5 Al Lake Castor Oil Dispersion


SWD-4511 D&C Red 7 Ca Lake Synthetic Wax Dispersion


A1 Mirage Glamour Gold A1 Castor Oil


A1 MIGLYOL® DO


A MIGLYOL® 829 ECO A SOFTISAN® 649


A Cosphaderm® T-70 Non Gmo Eco INCI NAME


Copernicia Cerifera Cera Euphorbia Cerifera Cera


Polyglyceryl-3 Tetrastearate Caprylic/Capric/Myristic/Stearic Triglyceride


Ricinus Communis Seed Oil (and) Titanium Dioxide


Ricinus Communis Seed Oil (and) Yellow 5 Lake (CI 19140)


Synthetic Wax (and) Red 7 Lake (CI 15850)


Calcium Sodium Borosilicate (and) Titanium Dioxide (and) Tin Oxide


Ricinus Communis Seed Oil Decyl Oleate


Caprylic/Capric/Succinic Triglyceride


Bis-Diglyceryl Polyacyladipate-2


1 1


Hyaluronic Acid VLMV (HyActive) powder, 10-50 kD


Hyaluronic Acid Na-Salt, 1,5-1,8 MD


Sodium Hyaluronate Sodium Hyaluronate


OligoHyaferre (<5 kDa) Hydrolyzed Sodiium Hyaluronate Dermosoft OMP Squalan veg.


C 1000 OC


Cosphaderm EGCg ECONAT


0.20


0.15 0.10


Methylpropandiol, Caprylyl Glycol, Phenylpropanol 3.00 Squalane


1.50


Helianthus Annuus (Sunflower) Seed oil Camellia Sinensis Leaf Extract


D Sodium Hydroxide 10% Sodium Hydroxide


0.50 0.20 1.28


Procedure: Prepare Phase A by heating water to 70°C and adding pre-dispersed Carbopol Ultrez 21 in Neutral Oil. Homogenize Phase A for 15 minutes. Add Simulgel to Phase B. Predisperse Hyaluronic Acid and Hyaluronic Acid Na-Salt in Propanediol. Predisperse Oligohyaferre in Dermosoft OMP. Add both predispersions under stirring to Phase A. Finally, add Squalane under stirring and homogenize for 10 min. Cool down Phase AB to 40°C. Add components of Phase C and homogenize for 5 min at max. shear rate. Cool down to room temperature and adjust pH to 6,0 under addition of D. Properties: Appearance: slightly yellowish-greenish gel emulsion; pH (20°C): 6,0; Viscosity (Brookfield, Spindle 5, 10 rpm): 18000 mPas


VANTAGE GLOBAL PROTECTION FACE & DÉCOLLETÉ DAY CREAM


PHASE INGREDIENTS NO. 901


SPLR % W/W 8.00 7.00


10.00 15.00


2 2.30 2 0.43 2 0.07


3 2.00 4 23.00


1 1 1


15.00 15.00 2.00


Tocopherol (and) Helianthus Annuus Seed Oil 5 0.20


Procedure: Premix phase A1. Add to phase A and melt to 80 - 85°C. Mix well and continue mixing while cooling. Fill below 75°C to prevent pigment from sedimenting. Allow to cool at room temperature.


Suppliers: 1. IOI Oleo 2 The Sun Chemical 3 Eckart 4 Gustav Heess 5 Cosphatec KENSING


ANTI-AGE SERUM PHASE INGREDIENTS


A Water, demin Miglyol 812


Carbopol Ultrez 21) B Cosphaderm Propanediol Natural Simulgel EPG


INCI NAME Aqua


Caprylic Capric Triglyceride


Acrylates/C10-30 Alkyl Acrylate Crosspolymer Propanediol


Caprylyl/Capryl Glucoside, Sorbitan Oleate, Polyisobutene, Sodium Acrylate/Sodium Acryloyldimethyl Taurate Copolymer


PERSONAL CARE MAGAZINE February 2026


% W/W 87.12 1.50 0.45


2.50 1.50 I BP-Triluronic® Acid Solution J StrataPhix™ AOS-PF K Fragrance


D Jeechem® NDA-5 Jeechem® NDA—LC Ceramide TIC-001


A Deionized Water Cola®Fax CPE-K Sodium Gluconate


B Glycerin Keltrol® CG-SFT


C Liponate™ NEB Uvinul® A Plus Uvinul® T 150 Tinosorb® S


INCI NAME Aqua (Water)


Potassium Cetyl Phosphate Sodium Gluconate Glycerin


Xanthan Gum C12-15 Alkyl Benzoate


Diethylamino Hydroxybenzoyl Hexyl Benzoate


Ethylhexyl Triazone


Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine


C15-19 Alkane C9-12 Alkane Ceramide NG


E Lipo™ GMS-450 Veg MB Glyceryl Stearate (Vegetable based) Iso Jojoba™ - 50 Lipovol™ GTB


Lipocol™ SC Pastilles


F Vitamin E Acetate G Preservative


H Tinosorb® A2B Cetearyl Alcohol


Tocopheryl Acetate Preservative


Tris-Biphenyl Triazine (and) Aqua (and) Decyl Glucoside (and) Butylene Glycol (and) Disodium Phosphate (and) Xanthan Gum


Water (and) Sodium Hyaluronate


Caprylic/Capric Triglyceride (and) Camellia Sinensis Leaf (and) Lithospermum Erythrorhizon Root Extract (and) Haematococcus Pluvialis Extract (and) Glycyrrhiza Glabra (Licorice) Root Extract


Parfum (Fragrance) L Timiron® Splendid Violet Mica (and) CI 77891


Simmondsia Chinensis (Jojoba) Butter Tribehenin


VPC.05.23.045 SPLR % W/W


1 45.85 2 2.00 3 0.10 1


3.00


4 0.30 5 7.00


6 6.50 6 2.50 6 2.50 5 5.00


5 6.00 7 0.05 5 1.50 5 2.00 5 1.50 5 1.70 8 0.30 1 0.50


6 8.00 5 1.00 5 1.00


1 0.50 9 1.20


Procedure: In the main vessel, add phase A ingredients and heat up to 75-80°C while mixing. In another container, premix phase B. Then, add phase B into phase 1 and mix until uniform. Ensure that the temperature is at 75-80°C. In B annex containers, weigh separately phase C and phase D and heat up to 75-80°C while mixing. When both phases reach 75-80°C, add phase C and D into phase E and maintain temperature at 75-80°C. When both phases are at 80°C, add oil phase into the water phase and mix with high shear mixing for 3min (Silverson). Then, switch to propeller mixer and start cooling batch down with gentle sheer mixing (300 rpm). At 30°C, add phases F to L ingredients one at a time and mix until uniform. Adjust pH to 5.5 - 6.0


Suppliers: 1. Local 2. Colonial 3. Jungbunzlauer 4. CP Kelco 5. Vantage 6. BASF 7. Vantage/Takasago 8. Tri-K 9. Merck www.personalcaremagazine.com


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72