PRODUCTS
Tack-free without UV light
Master Bond says its LED401 is a breakthrough system based on LED technology. This adhesive, sealant, coating and encapsulant cures tack-free upon exposure to a 405Nm wavelength light source, without any oxygen inhibition.
applications involving heat sensitive substrates. As a one part system, LED401’s open time is indefinite. It is a
M
higher viscosity system at 100,000 - 150,000cps, but maintains its flowability and convenient handling. With cure times of 15 to 30 seconds or less in thinner sections, depending upon the distance of the light source from the material being cured, it can also be readily cured in sections up to 1
/8
to similar and dissimilar substrates, including most plastics, metals and ceramics. Additionally, this compound has superior adhesion to glass, polycarbonates and acrylics. LED401 offers resistance to a variety of chemicals including
water, many acids, bases and oils. It has superior electrical insulation properties with a volume resistivity exceeding 1,014ohm-cm. Serviceable over the wide temperature range of -60°F to +250°F, LED401 features very good dimensional stability. Master Bond
LED401 has a shelf life of six months at room temperature without exposure to light, in its original containers. It is available in syringes, ½ pints, pints, quarts, gallons and 5 gallon containers. Other versions of this product are available with different viscosities and in an opaque white colour.
aster Bond points out that optically clear, its LED401 is also safer and easier to handle than similar UV systems as LED lights emit substantially less heat than UV lamps. This makes it a suitable choice for
Two new additions
shear bolt at
M24, both in A2 and steel zinc. The Seclock bolts have a unique patented scroll design with left and right handed helical grooves. Also recently added, the non-recess TRF®
S inch thick. It bonds well
shear bolt can be fastened with a normal cross recess driver. Once a certain torque is reached, the hexagon head brakes off and removal of the bolts is impossible. TRF are available in the sizes M3 – M6. Other products in its range include the 6-Lobe Pin, Hex Pin, Pin Phillips, Snake Eyes®
, One-Way and Cinstar® (5-Lobe Pin). All of
them are available in machine screws and sheet metal screws, mainly supplied in A2 but can also be delivered in steel zinc.
Elesa’s new levelling feet
Sometimes it is important to secure levelling feet to the floor to stop them ‘walking’ with the movement of the equipment or machine.
M
Tel: +44 (0) 117 – 972 8560 Fax: +44 (0) 117 – 972 8570 Email:
sales@avonstainlessfasteners.co.uk
aintaining alignment in production or transfer lines for example, is important. The new LMR.F levelling elements from Elesa offer just this facility. They are available in sizes from 50mm up to
100mm. They are manufactured in zinc plated steel or AISI 304/303 stainless steel and fitted with a non-slip NBR rubber soled foot, which may additionally be fixed with an axially mounted screw via a side extension tab. This arrangement resists rotation and so stabilises the equipment.
Standard Listed – you know who’s best! But contact us for all the rest . . .
Non-preferred Metrics – Intermediate Sizes Short and Long Lengths – Slotted Grub Screws
A4/80 Bolts & Socket Caps – 6 Lobe (TX) Drive Screws All Metal Self-Locking Nuts – Studding Connectors And many more . . .
Online Product Guide:
www.avonstainlessfasteners.co.uk Unit 10, Riverside Business Park, St Anne’s, Bristol, BS4 4ED, UK
ecuFast Seclock security bolts and nuts have recently been added to Douwes’ range and are available from M3 –
8.X51
Douwes International BV will be exhibiting SecuFast Seclock security bolts and nuts, and its non-recess TRF® Fastener Fair Stuttgart.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136 |
Page 137 |
Page 138 |
Page 139 |
Page 140 |
Page 141 |
Page 142 |
Page 143 |
Page 144 |
Page 145 |
Page 146 |
Page 147 |
Page 148 |
Page 149 |
Page 150 |
Page 151 |
Page 152 |
Page 153 |
Page 154 |
Page 155 |
Page 156