May/June, 2012
www.us-tech.com
Page 89 New Ironwood Socket Adapter for LG’s HDTV Chip
Eagan, MN — Ironwood Electronics has introduced a new high perform- ance socket, the SF-BGA656A-B- 64F, which allows 0.8mm pitch, 23 x 23mm body, 28 x 28 array LG XD Engine to be socketed and operate without compromising performance in demanding HDTV applications. XD engine is a technology used in LG HDTV to enhance picture quality. In addition to providing de-interlacing and up-scaling, XD Engine also pro- vides increased black levels and brightness of various aspects of the picture along with analog and MPEG noise reduction.
Ingenia Intros Digital Servo
The Giga-snaP BGA socket
adapter pair consists of SF- BGA656A-B-64F, patented female BGA sockets with machined pins epoxy over molded into an assembly that matches the male pin LS- BGA656A-61 adapter. The RoHS- compliant SF-BGA656A-B-64F BGA
socket is soldered to a PCB using standard soldering methods without warping which results in a reliable connection to the PCB. Both BGA socket and adapter are constructed with high temperature FR-4 body assuring match with target PCB’s and preventing failures that occur due to CTE mismatch. The user attaches a target 656 ball (LG) BGA chip or other compatible chip onto the (male) LS-BGA656A-61 BGA adapter, which, is plugged into the female BGA socket on the board. The chip is interconnected and the sys- tem is ready to go. The BGA socket adapters have
656-pin HDTV socket adapter.
Drive Barcelona, Spain — Ingenia Motion Control has released its VENUS digi- tal servo drive, an integrated motion controller and digital servo drive in a convenient standalone package. The package is capable of driving most motor topologies up to 2kW without the need for any additional heat sink- ing across its entire operating tem- perature range. The drive is suitable for the con-
trol of brushless DC, brushless AC, DC brushed, steppers and voice coil motors with build-in motion con- troller and high level motion lan- guage. It can control either rotary or linear motors.
the same solder ball types as the IC they are emulating. The Giga-snaP BGA socket adapters require half the force of conventional adapters at 20
pounds for the 656 pin device. The electrical path of the Giga-snaP BGA socket adapters is a high priority performance issue with the physical length from the top connection point on the male adapter to the solder ball on the female socket is 4.5mm. This is the shortest connection length by far for machined pin sockets, there- fore providing better transmission of high frequency signals. These adapters have passed environmental tests (MIL-STD) and qualified for HDTV applications. They are avail-
able in custom configurations. Contact: Ironwood Electronics,
1335 Eagandale Court, Eagan, MN 55121 % 800-404-0204 or 952-229-8200 fax: 952-229-8201 E-mail:
ila@ironwoodelectronics.com Web:
www.ironwoodelectronics.com
Servo drive and motion controller.
The servo drive is capable of
operating in many modes including Profiled Torque, Profiled Velocity, Profiled Position, Interpolated Posi - tion, Cyclic Sync Position and Hom - ing. In addition, it contains a wide range of feedback and on-board I/O options. The drive can operate with a
wide choice of feedback devices sup- porting by default Incremental En - coder, Digital Halls, Analog Halls, Analog Input (Potentiometer), PWM sensor and DC-Tachometer. The Venus also includes RS-232 interface (with daisy-chain option) and CAN interface with CANopen protocol (CiA-301, 402 and 303) for configura- tion and distributed motion control functionality. It accepts a wide set of command reference sources and can also execute pre-stored programs from its non-volatile memory. The drive comes with a complete
set of software tools that helps user to configure, tune and operate motion systems quickly. This feature allows the drives to be used standalone for single-axis or distributed intelligence
motion control applications. Contact: INGENIA-CAT, S.L., C/
Marie Curie s/n, Parc Tecnolrgic BCNord - Local A200, 08042 Barcelona, Spain % +34 932 917 682 fax: +34 933 549 845 E-mail:
info@ingenia-cat.com Web:
www.ingeniamc.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104