Sign Maker Advice
The important use of tape measures W
The humble tape measure often gets overlooked, but in this issue’s Sign Maker Advice, Paul Hughes, owner of Sign Making Tools, discusses the varied and important uses of the ever-important tape measure.
e often call the squeegee the overlooked, undervalued, and taken
for granted tool in the sign maker’s toolbox, but there is one more that is valued less and more taken for granted – the humble tape measure. We all use tape measures – most of us multiple times a day if we are cutting
sign boards, positioning vinyl graphics or surveying jobs.
So many options on the market There are literally hundreds of different designed tape measures, and for general measuring they all do a good job, but some stand out that make a sign maker’s job easier. I like to use different tapes for different
jobs. For general sign work around the workshop or fitting vehicles, I like to use a three-metre tape. I use a 3m tape as it’s not too bulky and is long enough to measure all the sheet material we use in the sign industry. If I am out and surveying buildings for
new signage, I tend to use a five or 10m tape, making measuring facias much easier and more accurate than bunny hopping along with a small tape. The trade-off is that the tape is much bigger and can be cumbersome if only trying to measure smaller items.
The trader’s choice There are two specialist tape measures that I think can save the sign maker time. The gap tape and a centre point tape. The gap tape is designed to measure
spaces inside a confinement. Think measuring the face of a shop window with a deep frame. We have all used a standard tape to do this by bending the tape into the corner. This is both inaccurate and damages
the tape by kinking it. The gap tape solves this problem; the top of the tape is just like any other tape, but the reverse takes the body of the tape off the end of the scale. When you put the end of the tape and the body of the tape inside a frame, you are measuring the gap without bending the tape. The centre point tape is an equally
clever tape. As sign makers, we constantly have to find the centre of a vehicle panel or sign board. With a normal tape, we have to measure the distance and then half that number to find the middle. The centre point tape solves this by
having two scales on the blade; one is a normal scale the other is the centre. If you measure 12in on the top scale, just look for the number 12 on the lower scale (which will be below the six on the top scale); this enables you to find the centre without having to do the maths. Both the centre point and gap tape
Centre point tape being used properly | 70 | July/August 2026
can save you time; if we can now find a tape that does not disappear every time you want to use it, we could be onto a winner.
www.signupdate.co.uk
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82
