◾ For system-compatible cable deflection while complying with minimal bending radii and to accommodate surplus cables and excess length. The elements may optionally be used individually or in combination for cable routing. They may be combined into semi-circular or circular elements.
◾ Supports use on corners and edges to allow pro- tected cable routing around them
◾ Mounting clips for use above the arc hold the routed cables back within the elements. The ele- ments are also bayable in an axial direction to allow U-based cable routing to the mounting level, or channelling of the cable sections.
Material: – Plastic, UL 94-V0
Colour: – RAL 9005
Supply includes: – Mounting clips and assembly parts
Packs of Maxi-kit 20 pc(s).
Model No. 5502.405
Cable shunting ring
For flexible, system-compatible cable routing at the side of the 482.6 mm (19") mounting angles.
Material: – Steel
Surface finish: – Zinc-plated
Supply includes: – Assembly parts
Dimensions mm
125 x 85 125 x 65 85 x 43
Packs of 10 pc(s).
10 pc(s). 10 pc(s).
Model No. 7111.900
7111.000 7112.000
Shunting ring
To accommodate large quantities of cables. Shunt- ing ring for side attachment to 482.6 mm (19") sections in 800 mm wide network enclosures. The ring is attached asymmetrically providing approx. 110 mm free space in front of the 482.6 mm (19") level. This allows even large quantities of cables to be effectively managed.
Material: – Steel
Surface finish: – Zinc-plated
Supply includes: – Assembly parts
Dimensions mm
330 x 90/70
Packs of 4 pc(s).
Model No. 7220.600
788
Further technical information available on the Internet.
