Especially when enclosures are exposed to chang- ing climatic conditions (e.g. with outdoor siting), condensation may form in sealed enclosures due to pressure differences. The integral sealing mem- brane largely prevents such pressure differences and hence condensation; additionally, it also pre- vents the ingress of moisture from the outside. Installed in vertical surfaces to protect against dirt.
Technical specifications: – Air permeability up to 120 litres/hour with a pressure difference of 70 mbar
– Connection thread M12 x 1.5 – For fitting in wall thicknesses up to 4 mm
Packs of 5 pc(s).
Material: –Polyamide
Colour: – Similar to RAL9005
Protection category IP to IEC 60 529: – IP 66, 68
Protection category IP to DIN 40 050-9: – IP 69K
Supply includes: –Lock nut
Model No. 2459.500
Condensate discharge
For reliable condensate discharge from the inside and protection against splashed water from the out- side (labyrinth effect). A hole diameter of 16 mm is required. (With AE sheet steel, the holes are already provided in the base).
Material: –Polyamide
Colour: – Similar to RAL 7035
Protection category: – Protection from splashed water, when professionally installed at the bottom
Packs of 6 pc(s).
Model No. 2459.000
642
Further technical information available on the Internet.
