Angular baying bracket for TS/TS Baying bracket for TS/TS and TS/PS
Note: – In addition, an external baying connector (see page 654) can be used for reinforcement
– When transporting large, heavy enclosure combi- nations by crane, we additionally recommend the use of combination angles 4540.000, see page 656
Also required:
– For protection category IP 55: One quick-fit baying clamp is required half-way up the enclosure height, see page 653
Notes on the transportation of bayed enclosures, see page 654
Example A
2 quick-fit baying clamps 8800.500 (see page 653)
4 angular baying brackets 8800.430
(see page 655) Example B
2 quick-fit baying clamps 8800.500 (see page 653)
2 angular baying brackets 8800.430 (see page 655)
4 baying brackets 4582.500
(see page 656) if the angular baying brackets cannot be fitted in the foremost installation position due to installed equipment such as large swing frames
B 1 A 7 8 1
7
8 7
8
Angular baying bracket
for TS/TS For a stable connection when transporting bayed enclosure suites.
Screw-fastening either ◾ Horizontally and vertically with 8 screws ◾ Horizontally with 2 screws and M8 threaded blocks, vertically with 4 screws is supported
Material: – Sheet steel
Surface finish: – Zinc-plated
Supply includes: – Assembly parts
Packs of 4 pc(s).
Model No. 8800.430
Rittal System Catalogue 35/System accessories
Further technical information available on the Internet.
