Support arm system CP 40/60/120/180 Support arm, height-adjustable
for support arm system CP 120 Offers enhanced ergonomics thanks to ◾ Adjustment range – for tall and short operators – for seated and standing work – adjustable to a maximum of 800 mm as required via an adjusting screw at the front of the support arm
◾ Precise coordination of the compression spring to the enclosure weight via an adjusting screw at the rear of the support arm
◾ Complete functional reliability – if the compres- sion spring breaks, the arm will remain in position
◾ Clip-off plastic panels for access to integral cable routing
◾ Tilting angle of the mounted enclosure is identi- cal in every height position
For 6510.330 and 6510.340 ◾ More space for cable routing ◾ Cables with connectors such as DVI, VGA are also easily inserted
◾ Integral locking in three stages ◾ Superior load capacity
Supply includes: – Assembly parts
Note: Maximum cross-section for cable entry: – 6510.210 = 8 x 15 mm
54
Overall length mm
962
1090 1090
Colour RAL
9006 9006 9006
range kg1) Model No. 6510.210 6510.330 6510.340
Weight
10 – 20 15 – 32 20 – 40
1) For configured enclosure and vertical support section Also required:
– Adaptor CP 120 to support arm, height- adjustable, 2 x 6071.600, see page 198
6510.330, 6510.340
Maximum no. of cables that may be inserted
Maximum connector dimensions
1 2
Max. Ø 7 mm (3 x) Max. Ø 8.5 mm (2 x)
39
Adaptor CP 120 to support arm, height-adjustable
Application: ◾ For integration of the height-adjustable support arm onto the support arm system CP 120
Benefits: ◾ Integral adjustment facility
Material: – Cast aluminium
Colour: – RAL 7035
Supply includes: – Seals – Self-tapping screws for support section attachment
Weight kg 0.6
Model No. 6071.600
198
Further technical information available on the Internet.
