for CM, TP one-piece console, TP pedestal for high dynamic loads For example, if a direct connection between the mounting plate and the enclosure is required for mobile use (cranes etc.). Tested as per DIN EN 60 721 severity 3 M4, with a weight of 150 kg evenly distributed over the mounting plate. Simply screw-fasten to the existing holes in the mounting plate to pre-assemble for:
Wall mounting from the inside Direct using a bracket and wall/support mounted enclosure.
Wall mounting from the outside Screws for wall mounting brackets (see page 698) are easily screwed into the plate nuts from the out- side
Material: – Sheet steel
Surface finish: – Zinc-plated
Supply includes: – Assembly parts
Packs of 1 pc(s).
Model No. 5001.075
Cross-brace
for mounting plates for TS, SE Additional horizontal rigidity for vibration resistance and/or stabilisation of wide mounting plates. This brace may also be used as an attachment aid for heavy components.
Material: – Sheet steel
Surface finish: – Zinc-plated
Supply includes: – 2 sections – 4 clamping sections – 4 grub screws M10 x 16 mm
For enclosure width mm
1200 1600 1800
Model No. 4333.120
4333.160 4333.180
Transport handles
for mounting plates for TS, SE May be used at any given position in the side C-fold. Benefits include: ◾ Can be used for people of different heights ◾ Optimised force transmission ◾ Easy handling
Packs of 2 pc(s).
Model No. 2415.500
706
Further technical information available on the Internet.
