REGULATION news
and thorough examination, as per the IMO guidelines. These appliances must be permanently marked and include documentary evidence of the safe working load (SWL).
New requirements for lifting appliances and anchor winches
July 2025
Lloyd’s Register (LR) has issued an update on the SOLAS Regulation II-1/3-13, which introduces new mandatory certification, testing, marking, and maintenance requirements for a wide range of lifting appliances and anchor handling winches.
Application
12/2025: New SOLAS requirements for Lifting Appliances Applicability: Shipowners, ship operators, ship managers, ship masters, and ship designers.
The IMO has introduced SOLAS Regulation II-1/3-13 through Resolution MSC.532(107), setting new requirements for lifting appliances and anchor handling winches. These updates will take effect on 1 January 2026, ensuring enhanced safety and operational standards across the maritime industry.
This Class News covers the requirements for lifting appliances,while a separate publication addressing anchor handling winches will follow. The SOLAS amendments are supplemented by the IMO MSC.1/Circ.1663 Guidelines for Lifting Appliances.
IMO has introduced SOLAS Regulation II-1/3-13 through Resolution MSC.532(107), setting new requirements for lifting appliances and anchor handling winches. These updates will take effect on 1 January 2026, ensuring enhanced safety and operational standards across the maritime industry. The new regulation applies to a wide range of lifting appliances, including those:
- Used for cargo loading, transfer, or discharge.
The new regulation applies to a wide range of lifting appliances, including those: • Used for cargo loading, transfer, or discharge • Used for raising and lowering hold hatch covers or moveable bulkheads • Used as engine-room cranes • Used as stores cranes • Used as hose handling cranes; • Used for launch and recovery of tender boats and similar applications • Used as personnel handling cranes
- Used for raising and lowering hold hatch covers or moveable bulkheads.
- Used as engine-room cranes. - Used as stores cranes. - Used as hose handling cranes. - Used for launch and recovery of tender boats and similar applications.
- Used as personnel handling cranes. 12/2025: New SOLAS requirements for Lifting Appliances
Generally, the requirements also apply to lifting appliances with a safe working load below 1,000 kg, unless the flag administration grants specific exemptions. However, certain lifting appliances — including those used on offshore construction ships — are outside the scope of this regulation.
Lloyd’s Register Group Limited (Reg. no.08126909) is a limited company registered in England and Wales. Registered office: 71 Fenchurch Street, London, EC3M 4BS, UK. A member of the Lloyd’s Register group. Lloyd’s Register is a trading name of Lloyd’s Register Group Limited and its subsidiaries. For further details please see
www.lr.org/entities © Lloyd’s Register Group Limited. 2025.
Requirements for new lifting appliances (installed on or after 1 January 2026)
Before entering service, new lifting appliances must undergo certification, which includes:
- Plan appraisal and material verification. - Inspection and testing during fabrication. - Verification of component certification (including loose gear). - Load testing and thorough examination once installed on board.
Lifting appliances certified or classed under Lloyd’s Register’s Code for Lifting Appliances (CLAME) framework will be compliant with the new SOLAS requirements.
Requirements for existing lifting appliances (installed before 1 January 2026) Under SOLAS Regulation II-1/3-13.2.4, lifting appliances installed before 1 January 2026 must undergo load testing
Requirements for new lifting appliances (installed on or after 1 January 2026)
Before entering service, new lifting appliancesmust undergo certification, which includes: • Plan appraisal and material verification
In instances where onboard lifting appliances do not have valid certificates of test and thorough examination under another international instrument acceptable to the flag Administration, the SWL should be determined by the owners, in accordance with the IMO guidelines (paragraph 3.2.1.6) and evidence of the SWL provided. For those non-certified lifting appliances, Lloyd’s Register (LR) will witness a load test followed by a thorough examination and will issue a factual statement to confirm the load test and examination.
At the first Cargo Ship Safety Construction Renewal Survey or Passenger Ship Safety Survey conducted after 1 January 2026, surveyors will verify that:
- All applicable lifting appliances are certified in accordance with an acceptable standard.
Generally, the requirements also apply to lifting appliances with a safe working load below 1,000 kg, unless the flag administration grants specific exemptions. However, certain lifting appliances—including those used on offshore construction ships—are outside the scope of this regulation.
- All lifting appliances are properly marked with safe working load (SWL) and other information essential for the safe operation of the lifting appliance (e.g. maximum or minimum slewing radius or boom angle).
- All loose gear is clearly and permanently marked with its unique identification (serial no.), the SWL and any additional marks required for safe use.
- All lifting appliances and associated loose gear were load tested and thoroughly examined by a competent person.
- All lifting appliances are provided with an operation and maintenance manual.
Note: An acceptable standard includes certification under LR CLAME, another IACS member code, ILO Convention 152, or any other international standard recognised by the flag administration. If no prior certification is found, lifting appliances must undergo load testing and thorough examination by a competent person, as defined by the Administration, during the renewal survey.
Maintenance, operation, inspection, and testing for all lifting appliances According to SOLAS Regulation II-1/3-13.3, all lifting appliances and loose gear must be operationally tested, thoroughly examined, inspected, operated and maintained in line with the IMO guidelines.
Owners must adhere to manufacturer recommendations, industry standards, and operational profiles while ensuring that lifting appliances are part of the onboard maintenance program. Maintenance and operational manuals must be available on board — where missing, the IMO guidelines provide methods for reconstructing them.
All personnel operating lifting appliances must be properly trained, qualified and familiarised in handling the equipment.
THE REPORT | SEP 2025 | ISSUE 113 | 51
Existing certificates issued under other international instruments — such as ILO Convention No. 152 — will be acceptable for compliance. If valid certificates are missing (e.g. for engine-room cranes), owners must determine the appropriate SWL for test load verification.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136
