Instrumentation/Measurement
New Battery Powered Indicators Provide Switching Control And Datalogging Functions
Status Instruments have launched their brand- new DM650 battery
powered product range.
n DM650TM temperature indicator accepts both Pt100 and Thermocouple temperature probes
n DM650PM pressure indicator measures pressure up to 100 bar
n DM650HM humidity indicator measures temperature and humidity
n DM650VI process signal indicator measures analogue signals such as voltage or mA
Housed in a plastic (ABS) IP67 enclosure, the instrument is also equipped with a volt free change over relay contact. The user may select relay actions of switch high, switch low and also includes deviation, with fully adjustable set point and hysteresis. The relay can be linked to switch on the process value or can be linked to battery condition if required.
The instrument displays the process value on a 6-digit LCD display and offers an additional advanced display mode allowing the user to display not only the process value, but one or two (1 – 32) scrolling character messages. This feature is further enhanced by the ability to link display messages to the alarm set point of the relay or battery condition.
The DM650 range also provides a powerful data logger function and relay state information.
MARCH/APRIL 2018
www.reviewonline.uk.com
Two methods of reading the log are available. The in-built USB port allows full configuration and reading of the logged data and allows the user to save to a text file for export to other programs. The NFC android interface allows contactless data transfer from the DM650 to android phones or tabs. Using the free downloadable App, the data can be graphed and or forwarded by email. The NFC interface is also capable of starting a new log with different log period and modes.
Application Example – DM650TM The battery powered DM650TM can be used to display the temperature of a typical pump bearing application. If the temperature exceeds a set point, the relay will trip to disable the pump.
At this point the DM650/TM display will indicate the alarm condition and a pre-set message to inform maintenance of the over temperature.
The log data showing how long the pump has been running and the temperatures recorded can be viewed either on a laptop or by using a NFC enabled Android device to allow wireless transfer of data.
For more information please contact:
sales@status.co.uk www.status.co.uk
ENQUIRY NO. 17
17
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48
